Bedienungsanleitung Batavia BT-RS004 - 7062850 (Seite 9 von 34) (Deutsch, Englisch, Holländisch, Französisch)

758285

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

English

6. Contents of packing

1× Reciprocating saw

1× Saw blade for wood

1× Saw blade for metal

1× Allen key

1× Instruction manual

7. Intended use

Your reciprocating saw has been designed

for sawing wood, metal and plastics.

8. Mounting and removing the saw

blade

Always switch off and unplug the saw

before working on the machine or changing

the saw blade.

8.1 Mounting

• Open the saw blade holder (2) by turn-

ing it counter-clockwise.

• Insert the saw blade (1) in the saw

blade holder (2) as far as possible. The

teeth of the saw blade (1) must point

downward and forward.

• Close the saw blade holder (2) by turn-

ing it clockwise.

8.2 Removing

• Open the saw blade holder (2) by turn-

ing it counter-clockwise.

• Remove the saw blade (1) from the saw

blade holder (2).

• Close the saw blade holder (2) by turn-

ing it clockwise.

9. Use

Always follow the safety notes and the rele-

vant safety code.

Make sure that the saw blade does not rest

on or touch any objects when the machine

is switched on.

9.1 Insert the plug into the socket. The LED

(4) lights up and indicates that power is

applied.

9.2 Switching on and off

• To turn on the machine, press the ON/

OFF switch (5). The switch can be set

to continuous mode by pressing the

power on lock (6).

• Pressing the ON/OFF switch (5) again

returns the power on lock (6) to the

starting position.

• To turn off the machine, release the ON/

OFF switch.

—The ON/OFF trigger is also used to

control the no load speed. The deeper

the trigger is pressed, the faster the unit

runs.

10. Pressure shoe

The pressure shoe (8) serves as a support

during cutting. The pressure shoe is freely

movable and can be tilted accordingly so

that it can be adjusted to the respective

cutting operation.

10.1 To adjust the length of the pressure

shoe, loosen both Allen screws (11a

and 11b) with the provided Allen key (9)

and pull the pressure shoe outward or

slide the shoe all the way inside.

10.2 Tighten the Allen screws again after you

have set the length of the pressure

shoe.

11. Sawing tips

• Adjust saw blade and stroke rate to suit

the material to be processed. For right

radius curves it is best to use a narrow

saw blade. Apply coolant or lubricant to

deal with the fluttering produced along

the cut line when sawing metal.

• Check wood, chip boards, building

materials etc, for foreign bodies (nails,

screws etc.), before sawing and remove

them, if necessary.

• Clamp material well. Do not support the

workpiece with hand or foot. Do not

touch objects or the floor with the saw

running (danger of backlash).

• Put the footplate on the surface of the

workpiece, and saw through it with

constant contact pressure or feed. If

the saw blade seizes switch the

machine off immediately. Spread the

gap with a suitable tool and pull out the

saw blade.

• After nishing work, switch off the

machine and only put down after it has

come to a complete standstill.

7062850-Reciprocating_Saw-Ma-1801-08.indb 7 19-03-18 11:09

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Batavia BT-RS004 - 7062850 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info