Bedienungsanleitung Batavia Racer BT-CS006 (Seite 22 von 60) (Deutsch, Englisch, Holländisch, Französisch)

589450

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

i) Do not use damaged grinding discs. Before

each use, inspect the grinding wheels for

any chipping or cracks. If the electric power

tool or the grinding disc is dropped, inspect

it for damage or replace it with an

undamaged grinding disc. When you have

inspected and installed the grinding disc,

make sure that you, and any other nearby

individuals, remain out of the plane of the

rotating grinding disc and then allow the

tool to rotate at its highest speed for one

minute. Damaged grinding discs usually break

during this test time.

j) Wear protective clothing and equipment.

Depending on the application, use either a

full face visor, protective goggles or safety

glasses. As far as appropriate, where a dust

mask, hearing protection, safety gloves or

special apron to protect yourself from

splinters and other particles of material.

Theeyesmustbeprotectedagainstanyying

particles which may be generated during the

various applications. Dust masks or respirators

mustlteroutthedustgeneratedbythe

application. If you are exposed to loud noise

for a long time, you may suffer from hearing

loss.

k) Make sure that other people remain at a

safe distance from your working area.

Anyone entering the work area must wear

personal safety clothing and equipment.

Fragments of the workpiece or of a broken tool

insertmayyoffandcauseinjuries,even

outside the direct working area.

l) If you are carrying out work in situations

where the tool insert may make contact with

concealed power lines or its own power

cable, only hold the device by the insulated

hand grips. Contact with a live cable could

result in metal parts of the device also

becoming live and lead to an electric shock.

m) Keep the power cable and the rotating tool

insert far apart. If you lose control of the

device, the power cable may be severed or

caught and may draw your hand or arm into the

rotating tool insert.

Never put down the electric power tool

before the tool insert has come to a complete

stop. The rotating tool insert may come into

contact with the supporting surface and cause

you to lose control of the electric power tool.

o) Do not leave the electric power tool running

while you carry it around. Your clothes may

become caught through accidental contact with

the rotating tool insert and result in the tool

drilling into your body.

p) Clean the ventilation slits on your electric

power tool, regularly. The motor fan draws

dust into the housing and a large accumulation

of metallic dust can cause electrical hazards.

q) Do not use the electric power tool in the

vicinity of ammable materials. Sparks can

ignite such materials.

r) Do not use any tool inserts which require

liquid coolants. The use of water or other

liquid coolants could result in electrical shock.

2.6 FURTHER SAFETY INSTRUCTIONS FOR

CUT OFF GRINDING APPLICATIONS

Kickback and relevant safety instructions

Kickback is the sudden reaction following snagging

or jamming of a rotating grinding disc. Snagging or

jamming lead to an abrupt stop of the rotating tool

insert. This may then cause the uncontrolled electric

power tool to accelerate in the opposite direction to

the inserted tools direction of rotation at the point

were it jammed. If, for example, a grinding disc

snags or jams inside a workpiece, the edge of the

grinding disc which is inside the workpiece may

become caught and thus cause the grinding disc to

jump out or create a kickback. The grinding disc then

moves towards or away from the operator,

depending on the direction of rotation of the disc at

the jamming point. This can also cause a grinding

disc to break. A kickback is the result of improper or

incorrect use of the electric Power tool. It can be

avoided by taking suitable precautions, as described

below.

a) Hold the electric power tool rmly and

place your body and arms in such a

position that you can absorb the force of a

kickback. Always use the auxiliary grips,

when available, in order to have the

greatest possible control over kickback

forces or torque reactions at high speed.

By taking suitable precautionary measures, the

operator can control kickback and reaction forces.

b) Never bring your hand into the vicinity of a

rotating tool insert. The inserted tool could

move over your hand if kickback occurs.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Batavia Racer BT-CS006 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info