Bedienungsanleitung Bauknecht BCIF 5O539 PLET (Seite 5 von 13) (Englisch)

806768

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

UPPER RACK

Load delicate and light dishes:

glasses, cups, saucers, low salad

bowls.

The upper rack has tip-up

supports which can be used in a

vertical position when arranging

tea/ dessert saucers or in a lower

position to load bowls and food

containers.

(loading example for the upper rack)

FOLDABLE FLAPS WITH ADJUSTABLE POSITION

The side foldable aps can be fold or

unfold to optimize the arrangement of

crockery inside the rack. Wine glasses

can be placed safely in the foldable

aps by inserting the stem of each

glass into the corresponding slots.

Depending on the model:

• to unfold the aps there is needed

to slide it up and rotate or release it

from the snaps and pull it down.

• to fold the aps there is needed

to rotate it and slide aps down or

pull it up and attach aps to the snaps.

ADJUSTING THE HEIGHT OF THE UPPER RACK

The height of the upper rack can be adjusted: high position to place

bulky crockery in the lower basket and low position to make the most

of the tip-up supports by creating more space upwards and avoid

collision with the items loaded into lower rack.

The upper rack is equipped with a Upper Rack

height adjuster (see gure), without pressing

the levers, lift it up by simply holding the rack

sides, as soon as the rack is stable in its upper

position.

To restore to the lower position, press the levers

A at the sides of the rack and move the basket

downwards.

We strongly recommend that you do not ad-

just the height of the rack when it is loaded.

NEVER raise or lower the basket on one side

only.

LOWER RACK

For pots, lids, plates, salad bowls, cutlery etc. Large plates and lids

should ideally be placed at the sides to avoid interferences with the

spray arm.

The lower rack has tip-up supports which can be used in a vertical

position when arranging plates or in a horizontal position (lower) to

load pans and salad bowls easily.

(loading example for the lower rack)

CUTLERY BASKET

The basket is equipped with top grilles for

improved cutlery arrangement. The cutlery

basket should be positioned only at the front

of the lower rack.

Knives and other utensils with sharp edges

must be placed in the cutlery basket with

the points facing downwards or they must

be positioned horizontally in the tip-up

compartments on the upper rack.

POWER CLEAN IN LOWER RACK

Power Clean® uses the special water jets

in the rear of cavity to wash more inten-

sively the high dirty items.

Placing the pots/casseroles faced to the

Power Clean® component please activa-

te the POWER CLEAN on the panel.

The lower rack has a Power Clean, a special pull-out support in the rear

of the rack that can be used to support frying pans or baking pans in

upright position, thus taking up less space.

How to use Power Clean®:

1. Adjust the Power Clean® area (G)

folding down the rear plate holders

to load pots.

2. Load pots and casseroles inclined

vertically in Power Clean® area. Pots

have to be inclined towards the

power water jets.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bauknecht BCIF 5O539 PLET Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bauknecht BCIF 5O539 PLET

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info