Bedienungsanleitung Bauknecht BCIF 5O539 PLET (Seite 6 von 13) (Englisch)

806768

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

SELECTING A CYCLE AND OPTIONS

The list of available cycles and options can be found in Cycles Table

on next page. Eco cycle is selected by default. If you want to have Last

Used cycle selected by default, you can change it in „Settings Menu”.

It is possible to select a cycle by pressing 1 of 6 cycles direct access

buttons or by pressing „Extra Cycles” button repeatedly. When the

last one is reached a further press goes back to the rst.

Press cycle button to choose cycle in accordance with the level

of soiling of the dishes and with Cycles Table. Information will be

shown on the display:

1. Indicators

2. Name of the selected cycle

3. Vertical bar showing the position of the extra cycle list only

4. Energy consumption of the selected cycle

5. Water consumption of the selected cycle

Three seconds after selecting a cycle, its

time and temperature will be displayed

(if available).

Press „INFO” button to display a brief description of the cycle and

its water / energy consumption.

During the selection phase the „START” LED blinks.

Additional options are available for most cycles (see „Options and

Settings” section). When any option is selected, its name is shown on

the display on the right.

If more than one option is selected one

bullet point for each option is displayed.

Each option name is displayed for 3 sec.

with its bullet point fulled.

When the cycle and option selection is complete, press „START”

button and close the door within 4 seconds to start chosen cycle.

After the cycle nishes, there is an acustic signal and the dispaly

shows:

On the display additional information can be shown:

• ADD SALT - rell salt reservoir.

• ADD RINSE AID - rell rinse aid.

• DEGREASE AND CLEAN MACHINE WE RECOMMEND WPRO - every 50

cycle, will be recommended to use the WPRO cleaner (according to

instruction on the consumable).

After 10 minutes the appliance switches o.

WATER SOFTENING SYSTEM

Water softener automatically reduces water hardness, consequently

preventing scale buildup on heater, contributing also to better cleaning

eciency.

This system regenerates itself with salt, therefore it is required to

rell salt container when empty.

Frequency of regeneration depends on water hardness level setting -

regeneration takes place once per 6 Eco cycles with water hardness

level set to 3.

Regeneration process starts in nal rinse and nishes in drying phase,

before cycle ends.

• Single regeneration consumes: ~3.5L of water;

• Takes up to 5 additional minutes for the cycle;

• Consumes below 0.005kWh of energy.

NORMALLY SOILED CROCKERY.

STANDARD PROGRAM,

WATER ENERGY

POWER

CLEAN

50° 3:20h

MODIFYING A RUNNING PROGRAM

If a wrong program was selected, it is possible to change it, provided

that it has only just begun: open the door, press and hold the

„ON/OFF” button, the machine will switch o.

Switch the machine back on using the „ON/OFF” button and

select the new wash cycle and any desired options; start the cycle by

pressing the „START” button and closing the door within 4 sec.

TO PAUSE THE CYCLE (ADDING EXTRA ITEMS)

Open the door and place the crockery inside the dishwasher,

(beware of HOT steam!). Press „START” button and close the door

within 4 sec. to resume the cycle from the point at which it was

interrupted.

ACCIDENTAL INTERRUPTIONS

If the door is opened during the wash cycle, or if there is a power

cut, the cycle stops. To resume the cycle from where it was interrup-

ted, press the „START” button and close the door within 4 sec.

CYCLE FINISHED

Open appliance door (beware of hot steam!) and unload the racks,

starting from the lower rack rst.

If it is needed to rell salt reservoir or rinse aid dispenser, it is recom-

mended to do this operations right before start of the next cycle.

POWER

CLEAN

50° 3:20h

ECO CYCLE

1 2 3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bauknecht BCIF 5O539 PLET Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bauknecht BCIF 5O539 PLET

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info