Bedienungsanleitung Bauknecht KR 195 A (Seite 19 von 56) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

806856

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

EN - 19

• Wait at least two hours, after the installation, before connecting the appliance to the power supply.

Connect the appliance to the power supply and turn the thermostat knob to switch on the appliance.

After turning the appliance on, you must wait for 4-6 hours for the correct storage temperature to be

reached for a normally lled appliance.

• Your fridge may have a smell when it is operated for the rst time. This is normal and the smell will

fade away when your fridge starts to cool.

FIRST TIME USE

Thermostat setting

• Larders (coolers) have not any freezer compartment but can cool below 5°C.

• Thermostat automatically regulates the inside temperature of the refrigerator compartment.

By rotating the knob from position 1. to 5., colder temperatures

can be obtained.

• « • » position shows thermostat is closed and no cooling is

available.

• For short-term storage of food in the freezer/refrigerator

compartment, you can set the knob between minimum and

medium position.(1-3)

• For long-term storage of food, you can set knob to medium position.(3-4)

Temperature Settings Warnings

• Larders (coolers) have not any freezer compartment but can cool up to 4 - 6 °C.

• The ambient temperature, temperature of the freshly stored food and how often the door is opened

affects the temperature in the fridge. If required, change the temperature setting

• It is not recommended that you operate your fridge in environments colder than 10°C in terms of its

efciency.

• When setting the thermostat, take into consideration how often the appliance door is opened and

closed, how much food is stored in the refrigerator, and the environment in which the refrigerator is

located.

• When the appliance is rst switched on, allow it to run for 24 hours in order to reach large quantity of

food inside. operating temperature. During this time, do not open the door and do not keep a large

quantity of food inside.

• Unplug your appliance during a power cut to prevent damage to the compressor. Once power is

restored, delay plugging in your appliance for 5 to 10 minutes. This will help prevent damage to the

appliance’s components.

• Your appliance is designed to operate in the ambient temperature ranges stated in the standards,

according to the climate class stated in the information label. It is not recommended that your fridge

is operated in the environments which are outside of the

stated temperature ranges. This will reduce the cooling

efciency of the appliance.

• This appliance is designed for use at an ambient

temperature within the 10°C - 43°C range.

USAGE INFORMATION

Climatic Class Amb. T. (°C)

SN: From 10 to 32 °C

ST: From 16 to 38 °C;

N: From 16 to 32 °C

T: From 16 to 43 °C

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bauknecht KR 195 A Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info