Bedienungsanleitung Bauknecht KR 195 A (Seite 21 von 56) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

806856

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

EN - 21

• The original packages and foamed polystyrene (PS) can be retained if required.

• During transportation, the appliance should be secured with a wide string or a strong rope. The

instructions written on the corrugated box must be followed while transporting.

• Before transporting or changing the installation position, all the moving objects (ie,shelves,crisper...)

should be taken out or xed with bands in order to prevent them from getting damaged.

Carry your fridge in the upright position.

Repositioning the door

• It is not possible to change the opening direction of your fridge door, if the door handles on your

fridge are installed from the front surface of the door.

• It is possible to change the opening direction of the door on models without any handles.

• If the door opening direction of your fridge may be changed, you should contact the nearest Authori-

sed Service to have the opening direction changed.

TRANSPORTATION AND CHANGING OF

INSTALLATION POSITION

If your refrigerator is not operating as expected, check the solutions listed below before calling an

electrician or the after sales service.

What to do if your refrigerator does not operate:

Check that :

• Your fridge is plugged in and switched on,

• The fuse is not blown and there is not a power cut,

• The thermostat setting is in the on « • » position,

• The socket is no longer functioning. To check this, plug in an appliance that you know is working

into the same socket.

What to do if your refrigerator performs poorly:

Check that:

• You have not overloaded the appliance,

• The doors are fully closed,

• There is no dust on the condenser,

• There is enough space for air circulation at the rear and side of the appliance.

If your fridge is operating too loudly

Normal Noises

• Cracking (Ice cracking) Noise: (For no frost/frost free appliances)

• During automatic defrosting. When the appliance is cooled or warmed (due to expansion of

appliance material).

• Short cracking: Heard when the thermostat switches the compressor on/off.-

Compressor noise

• Normal motor noise: This noise means that the compressor operates normally

• The compressor may cause more noise for a short time when it is rst activated.

Bubbling noise and splash:

• This noise is caused by the ow of the fridge freezer in the tubes of the system.

If your fridge is operating too loudly

• To maintain the set cooling level, compressor may be activated from time to time. Noises from your

fridge at this time are normal and due to its function. When the required cooling level is reached,

noises will be decreased automatically.

If the noises persist;

• If you will not use your fridge for a long time (e.g. in summer holidays), put the thermostat to “•” • Is

your appliance stable? Are the legs adjusted?

• Is there anything behind your fridge?

• Are the shelves or dishes on the shelves vibrating? Re-place the shelves and/or dishes

BEFORE CALLING SERVICE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bauknecht KR 195 A Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info