Bedienungsanleitung Bauknecht WAK7990 (Seite 10 von 13) (Englisch)

53098

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

TROUBLESHOOTING GUIDE

Depending on the model, your washing machine is

equipped with various automatic safety functions. This

enables faults to be detected in good time and the

safety system can react appropriately. These faults are

frequently so minor that they can be removed within a

few minutes.

The appliance will not start, no lamp lights up.

Check whether:

• the mains plug is inserted into the socket

• the wall socket is functioning correctly (use a table

lamp or similar) to test

the washing machine will not start...

(varies according

to model)...

and the “Start” or “Start/Pause” light

(depending on model) flashes

Check whether:

• the appliance door is properly closed (child safety)

• the “Start” or “Start/Pause” button has been

pressed

...and the “Start” or “Start/Pause” light (depending

on model) goes on

(for models with a digital display a dash

appears here)

Check whether:

• a programme has been selected

• the door is correctly closed

...and the “On/Off” lamp goes on (depending on

model).

Check whether:

• the appliance door is properly closed (child safety)

• the tap is turned on (see also “Fault in the water

supply/safety hose”)

• a programme has been selected

The washing machine stops during the

programme

(varies depending on model)

Check whether:

• the “Rinse Hold” light flashes, or the “Rinse Hold”

button has been pressed; terminate this special

option by pressing the button

• another programme has been selected and the

“Start” or “Start/Pause” button (depending on

model) is flashing. Reselect the desired programme

and press the “Start” or “Start/Pause” button

• the door has not been closed before pressing the

“Start” or “Start/Pause” button.

Open and close the door again and press the “Start”

or “Start/Pause” button.

• the “On/Off” button has been pressed and the light

is on

• the washing machine safety system has been

activated (see “Fault Indicators” table)

Detergent and additive product residues in

dispenser at end of wash.

Check whether:

• the siphon is correctly installed and clean (see

“Care And Maintenance”)

• sufficient water is entering. The mesh filters in the

water connection could be blocked (see “Care And

Maintenance”)

• when using powder detergent beforehand the

coloured insert for dosing liquid detergent has been

removed from the dispenser

The washing machine vibrates during the spin

cycle.

Check whether:

• the washing machine is level and standing firmly on

all four feet

• the transport bolts have been removed. Before

using the washing machine, it is imperative that the

transport bolts are removed

Final spin results are poor.

The washing machine has an unbalance detection and

correction system. If individual heavy items are loaded

(e.g. a bathmat or bathrobe), this system may reduce

the spin speed automatically or even interrupt the spin

completely if it detects too great an imbalance even

after several spin starts, in order to protect the washing

machine.

• If the laundry is still too wet at the end of the cycle,

add smaller articles of laundry and repeat the spin

cycle

• Excessive foam formation may prevent spinning.

Observe correct detergent dosages

• Check wether spin speed is deselected, no spin

speed indication lamp lights up (if existing -

depending on model)

The programme time indicated on the time

remaining display “jumps” up or down suddenly by

several minutes, or the programme time shown

initially is lengthened/shortened by a period of time

This is a normal capacity of the washing machine to

adapt to factors that the wash programme time can

have an effect on, e.g.:

• excessive foaming

• load unbalance through individual, heavy items of

laundry

• long heating time from correspondingly cold water

supply

Because of influences like these, the time remaining in

the programme run is recalculated, and updated if

necessary. In addition, during the filling phase, the

washing machine determines the load and if necessary

adjusts the initial programme time displayed

accordingly.

4GB05140.fm Page 62 Wednesday, April 14, 2004 12:18 PM

Black process 45.0° 100.0 LPI

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bauknecht WAK7990 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info