Bedienungsanleitung Be Cool Flow Iso-Fix (Seite 19 von 48) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

768101

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

CAR SEAT BELT 15kg-36kg

With the child place in the seat put the seat belt on passing it

through the guide(7). Fasten the seat belt buckle and make sure

the belt is not too loose gently pulling the diagonal part of the belt

before placing the belt over the childs chest.

Check the diagonal belt passing it through the lower belt guide (14)

3. USING THE SAFETY SEAT

9kg-18kg

3a To adapt the harness and the headrest to the correct position

press the lever (6) and pull the headrest (1) upwards .The harness

Will automatically move upwards without you having to do

anything. Place the harness in the correct position showed in the

diagram.

15kg-36kg

Use the same lever to upwards to height of the headrest to be

adapted to the growing of the child. Make sure that the belt guide

is about 2 centimetres above the child ’s shoulder.

If you need to lower the position harness or headrest do the same

operation in reverse.

SEAT RECLINING SYSTEM

FLOW child seat have 4 position reclining to make it more comfor-

table for the child.

3b To recline the seat press the lever (A) and pull forward until

reaching the required position.

MAINTENANCE

Fitting / removing the cover

It is very easy to take the cover off the FLOW seat. The cover has 7

fastening points on the front part.

Simply unfasten these points and then gently pull the front part

of the cover.

On the sides of the seat there are some plastic parts that are used

to fasten the cover. Simply pull these gently to take the cover off.

To put the cover back on again just follow the same process in

reverse. Fit the parts into the slots for the sides.

Cleaning

The cover can be machine washed using mild detergent and at a

maximum temperature of 30ºC.

Please see the washing instructions on the care label of the cover.

Do not tumble dry as this could cause the padding to come away

from the fabric.

Do not expose the upholstery to sunlight for prolonged periods;

when the seat is not in use cover it up or store it in the vehicle boot.

The plastic parts can be cleaned with a damp cloth and neutral

detergent.

Recommendations

Keep this instruction book for future reference.Always store it in

the compartment in the back of the shell.

In the vehicle make sure that all luggage, as well as any other

object that could cause injury in the event of an accident, is

correctly secured or stored.

GUARANTEE INFORMATION

This article is guaranteed in accordance with R.D. 1/2007 of

16th November.

Keep your receipt as proof of purchase, you need to show it at

the store where you purchased the product to prove validity in

the event of any type of claim.

This guarantee does not cover any faults or breakages caused

by misuse of the article or by not following the safety and

maintenance information listed in the instructions and on the

care labels.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Be Cool Flow Iso-Fix Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info