Bedienungsanleitung Behringer X32 Producer (Seite 6 von 74) (Englisch)

660493

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

6 X32 PRODUCER DIGITAL MIXER User Manual

Input Channel Banks

You will nd a select button on top of every channel that is used to direct the

control focus of the user interface, including all channel related parameters

(channel strip and main display), tothat channel. Please note that at any time,

there is exactly onechannel selected (either Input Ch 1-32, Aux 1-6/USB,

FXReturns 1L-4R, Mix Bus 1-16, Main LR/C, orMatrix 1-6). DCA Groups

(digitally controlled amplier) cannot be selected because they control a number

of assigned channels rather than one specic channel.

The Input Channels section of the console is locatedon the left hand side, and oers

8 separate input channel strips. These 8 channel strips represent six separate layers of

inputs for the console, including:

• Input Channels 1-8

• Input Channels 9-16

• Input Channels 17-24

• Input Channels 25-32

• Aux Inputs 1-6/USB playback

• Eects Returns

Press any of the correspondingly labeled layer buttons on the left side of the

console to switch the input channel bank to any of the six layers listed above.

The button will illuminate, reminding you which layer is active.

Two more layers (Bus Master 1-8 and 9-16) are also oered, allowingyou to

adjust the levels of the 16 Mix Bus Masters, which is useful when you wish to

include Bus Masters into DCA Group assignments.

On each fader strip you will nd a motorized 100mm level fader, Mute and Solo

buttons, aGate indicator, an input level meter, Compressorindicator, and the

channel selectbutton.

Channel Strip and Monitoring

The X32 PRODUCER’s channel strip oers dedicated controls for the most

important processing parameters of the currently selected channel. To adjust

controls for a given channel strip, simply press the Select button on the desired

input or output channel.

Certain sections of the channel strip (such as the low cut lter, noise gate, EQ and

compressor) contain a respectively labeled button that can be pressed to switch

the specic eect on and o. Thebutton illuminates to show the eect is active,

and goes dark when bypassed.

Within the channel strip, the rotary control knobs are surrounded by an amber

LED collar that indicates the parameter’s value. Whenever this backlit knob is

turned o, it indicates that this specic control/parameter is not available for

the selected channel type. For example, if an output bus is currently selected,

the LED collar and the gainknob are turned o, because there is no input gain to

be controlled on an output bus.

The channel strip consists of the following sub-sections:

• Cong/Preamp

• Gate, Dynamics

• Equalizer

• Main Bus

Each of these subsections correspond to the processing steps of the currently

selected channel, and they each have their own View button that, when pressed,

switches the Main Display to a page displaying all related parameters for

thatsubsection.

Monitoring and Talkback

There are two separate Level controls in this section, one for the headphone

output located at the front of the console, and a second one for the monitor

outputs located on the rear panel.

Press the section’s View button to edit various monitoring preferences, such as

the input source forthe phones bus and the monitor outputs.

This section also contains independent Talkback buttons (A and B). Press the View

button next to the Phones Level knob, then press Page Select right to access the

Talkback A and B edit pages.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Behringer X32 Producer Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Behringer X32 Producer

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info