Bedienungsanleitung Behringer X32 Producer (Seite 7 von 74) (Englisch)

660493

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

7 X32 PRODUCER DIGITAL MIXER User Manual

Ch01

FatSnare

OpeningScene

02: next 0:00 - 0:00

A: S16 A: 48K

B: - C: X-USB

: 15

01 15:33

home

cong

gate dyn eq sends main

Main Display Area

The main color display presents information about various sections of the

console. It can be switched to dierent screens using the console’s View buttons,

as well as any of the 10 buttons on either side of the display.

The top section of the main display permanently covers useful status information.

The top left corner shows the selected channel number, its nickname and the

selected icon. The next block shows the current scene number and name in

amber, as well as the next upcoming scene. The center section displays the

playback le name along with elapsed and remaining time and a recorder status

icon. Thenext block to the right has 4 segments to show the status of AES50

ports A and B, the Card slot and the audio clock synchronization source and

sample rate (topright). Small green square indicators show proper connectivity.

The right most block shows the console time that can be set under Setup/Cong.

When working with any given screen, press the Page keys located on the display

bezel to switch to dierent screen pages.

Editing parameters or settings on each of the screens is done using the

6 associated push-encoders along the bottom edge of the display.

• Whenever there is a continuous control or list entry, you can turn the

corresponding knob forediting, which is indicated by various circularicons

• When there is a switch or toggle function on one of these knobs, you will see

a broad rectangular button along the lower edge of the eld. Pressing the

encoder changes the on/o state of the corresponding function. When the

rectangular button in the display is dark grey, thecorresponding function is

o/inactive; whenit is amber, the function is on/active

Group/Bus Channel Banks

This section of the console oers eight channel strips, divided into the

following layers:

• Eight DCA (digitally controlled amplier) groups

• Mix Bus masters 1-8

• Mix Bus masters 9-16

• Matrix Outputs 1-6, and the main center bus

This section also contains a main LR output fader, which is independent and

always available no matter which channel bank or layer is active.

When using the DCA Groups layer, the DCA Groups can be soloed and muted,

but they cannot be selected. To edit the DCA group names, icons and colors,

navigate to the Setup/DCA Groups page on the main display. DCA group names,

icons and color can also be edited by pressing the Utility and Select button

concurrently. Once the Setup/scribble strip page is open you can directly select

any other channel for editing its layout in the same run.

When using any of the output bus layers, notethat the bottom LEDs on the

meters in this section illuminate when the respective bus is fed from pre-fader

sources of the selected channel.

Various Assignments

• Assigning DCA Groups

Thanks to the two distinct fader groups (inputs on the left, outputs on the

right), the task of assigning channels or buses to a virtual DCA Group is a breeze

on the X32 PRODUCER. Simply hold the respective DCA Group Select button on

the right-hand side of the console, whilepressing the Select buttons for all the

input channels that you wish to assign to said DCA Group. You can also press the

DCA Group Select button in order to check which channels are already assigned to it.

Theassigned channel Select buttons will light up.

• Custom Assignable Controls:

The Assign section of the console oers three banks of 8 buttons, allowing for

freely customizable access to 24 random functions on the X32 Compact.

To make a custom assignment:

• Press the View button in the Assign section to edit the assignments

• Select the set of controls you wish to edit

(A, B or C)

• Select the control 1-8 you wish to assign

• Select the parameter you wish to control and assign the function

Usually this is used to control a specic channel’s parameter, like the lead

vocalist’s reverb on/o status.

The Jump-to-Page control is a special target type that does not alter any audio

parameter, but rather brings you directly to any specied display page.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Behringer X32 Producer Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Behringer X32 Producer

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info