Bedienungsanleitung Behringer X32 Producer (Seite 55 von 74) (Englisch)

660493

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

55 X32 PRODUCER DIGITAL MIXER User Manual

7.7.3 Setup Screen: Remote Tab:

The setup screen’s remote tab allows setting up the console as a control surface

for various DAW recording software on a connected computer. With its large

complement of motorized faders, the console can act as an excellent controller

for various DAW software, allowing the user to make level adjustments quickly

and easily without using a mouse.

To adjust the various remote settings, perform the following steps:

1. Tap the 1st encoder to enable the console’s top panel Remote button.

Thisswitches various console hardware, such as the bus faders, tocontrol

computer DAW software instead of the console’s internal audiopath.

2. Adjust the 2nd encoder to select the specic control surface protocol used,

inconjunction with the target DAW software. Choices include:

• Mackie Control: Use this protocol to control any DAW software that is

compatible with a Mackie Control hardware control surface.

• HUI: Use this protocol to control any D.A.W. software that is compatible

with a HUI hardware control surface, such as Pro Tools.

3. Tap the 2nd encoder to assign the currently selected control surface protocol.

4. Adjust the 5th encoder to select whether the remote function uses the MIDI

In and OUT jacks or the X-USB card’s MIDI.

5. Tap the 5th encoder to conrm the selection.

6. Adjust the 6th encoder to adjust various MIDI-based operations for the

console. Choices include:

• MIDI In/Out: This toggles the MIDI input and outputs for the console

on/o.

• Card MIDI: Allows MIDI transmission through the X-USB card.

• USB In/Out: This toggles the console’s USB ports on/o.

• RTP (Real-time Transport Protocol): This toggles on/o the console’s

ability to interface with an Ethernet-based MIDI system.

• Enable MIDI scene recall: This toggles on/o the console’s response to

incoming MIDI messages for switching console scenes.

7. Tap the 6th encoder to toggle the currently selected MIDI option

on/o. Thiscan be useful if you want to ensure that any connected MIDI

transmitters cannot interfere with the console.

7.7.4 Setup Screen: Network Tab:

The setup screen’s network tab contains settings used when connecting the

console to a standard Ethernet network. The user can set parameters such as

using a xed IP address or having one assigned, as well as setting up the Ethernet

and subnet mask settings.

To set the network address for the console, perform the following steps:

1. Adjust the 1st encoder to select which specic network eld to adjust.

Choices include:

• IP Address

• Subnet Mask

• Gateway

2. Adjust encoders 2, 3, 4, and 5 to set the 4 numerical elds to be adjusted,

forthe selected network eld.

3. Tap the 6th encoder to assign the adjusted settings.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Behringer X32 Producer Seite 55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Behringer X32 Producer

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info