Bedienungsanleitung Behringer X32 Rack (Seite 54 von 64) (Englisch)

660494

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

54 X32 RACK DIGITAL MIXER User Manual

7.9.3 Scenes Screen: Parameter Safe Tab

The scenes screen’s “parameter safe” tab congures which console parameters

are and are not saved/switched with the console scenes. This is very useful

when the operator has certain parameters that they wish to remain in control

of, andwould never want to have altered during a scene change, for example,

themic pre gains on the input channels.

To adjust the various settings on the Parameter Safe tab, perform the

followingsteps:

1. Rotate any of the rst 4 encoders to navigate among the checkboxes in the

color screen, which represent various console areas that can be isolated from

scene changes.

2. Tap any of the rst 4 encoders to select the console areas that have been

selected with the encoders. In each of the four columns, multiple console

areas can be selected and isolated from scene changes.

The following areas of the console can be isolated from scene changes, and are

divided up into 4 columns on the color screen:

Column 1: Input Channels

• HA (Head Amp/Microphone Preamp)

• Conguration

• Channel Equalizer

• Channel Gate/Compressor

• Channel Insert

• Channel Groups

• Fader, Pan, Mute, Mix Ons

Column 2: Input Channels

• Mix sends 1-16

Column 3: Mix Buses

• Mix sends 1-16

• Conguration

• Equalizer

• Compressor

• Insert

• Groups

• Fader, Pan, Mute, Matrix Ons

Column 4: Console

• Conguration

• Solo

• Routing

• Output Patch

7.9.4 Scenes Screen: Channel Safe Tab

The scenes screen’s “channel safe” tab congures which console channels are

and are not changed when a console scene change occurs. This allows the

user to “protect” certain channels from ever changing during a scene change,

givingthem as much control as possible for key audio sources.

For example, in a theater context, the console operator may have dialed in just

the right EQ and compressor settings and channel volume for the voice of the lead

actor, and does not wish to have them altered when the console changes scenes

and alters various parameters.

To adjust the various settings on the Channel Safe tab, perform the

followingsteps:

1. Rotate any of the 6 encoders to navigate among the check boxes in the color

screen, which represent various groups of channels that can be isolated from

scene changes.

2. Tap any of the 6 encoders to select the console areas that have been

highlighted with the encoders. In each of the 6 columns, multiple console

areas can be selected and isolated from scene changes.

The following areas of the console can be isolated from scene changes, and are

divided up into six columns on the color screen:

Column 1: Channels

• Input Channels 1-16

Column 2: Channels

• Input Channels 17-32

Column 3: Buses

• Aux 1-8

• FX 1L through 4R

Column 4: Returns

• Mix 1-16

Column 5: Main/Matrix/Groups

• Matrix 1-6

• LR Bus

• Center/Mono Bus

• DCA groups 1-8

Column 6: Eects Slots

• FX 1-8

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Behringer X32 Rack Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Behringer X32 Rack

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info