Bedienungsanleitung Behringer X32 Rack (Seite 55 von 64) (Englisch)

660494

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

55 X32 RACK DIGITAL MIXER User Manual

7.10 Mute Group Screen

The mute group screen allows for quick assignment and control of the console’s

6mute groups, and oers two separate functions:

1. It mutes the active screen during the process of assigning channels to mute

groups. This ensures that no channels are accidentally muted during the

assignment process during a live performance.

2. It oers an additional interface for muting/unmuting the mute groups in

addition to the dedicated mute group buttons at the bottom of the console.

When activated, the mute screen only covers the bottom portion of the

main display, allowing the middle portion to continue displaying its usual

screencontent.

Note - Channels must be assigned to a Mute Group via iPad or PC.

To use the mute groups screen to mute/unmute the groups, perform the

following steps:

1. Tap any of the six encoders to mute the corresponding group, and thus mute

all channels that are assigned to that mute group.

2. Tap the encoder of a currently muted group to “un-mute” the mute group.

3. When nished working with mute groups, tap the Mute Group screen button

to exit the mute groups screen. The entire screen will again display its full set

of controls for whatever page it was previously on.

7.11 Utility Screen

The utility screen is a supplemental screen designed to work in conjunction

with the other screens that may be in view at any particular moment. The utility

screen is never seen by itself, it always exists in the context of another screen.

To reinforce this point, when the utility screen button is pressed, it illuminates at

the same time that another screen button is also illuminated, showing you which

screen it is providing extra utilities for. For most screens, pressing the utility

button simply acts as a shortcut to a page that can be navigated to by other

means. In a few cases, a utility page provides extra utility functions not seen

anywhere else.

The utility button works in the following manner with the other screens on

theconsole:

Channel Preamp Screen:

USB Screen: Takes the user directly to the “select folder” tab of the USB screen.

Monitor/Talkback Screens: There are no utility functions for any of the

dierent pages of the monitor screen.

Scenes Page: Provides an interface for copying, pasting, loading, and saving

dierent scenes in the scene list. Adjust and tap the six rotary encoders to

perform these functions.

Custom Screen: There are no utility functions for any of the dierent pages of

the custom screen.

Meters Screen: There are no utility functions for any of the dierent pages of

the meters screen.

Routing Screen: Takes the user directly to the routing tab of the library screen.

Setup Screen: There are no utility functions for any of the dierent pages of the

setup screen.

Library Screen: There are no utility functions for any of the dierent pages of

the library screen.

Eects Screen: Takes the user directly to the eects tab of the library screen.

All other pages: Takes the user directly to the channel tab of the libraryscreen.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Behringer X32 Rack Seite 55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Behringer X32 Rack

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info