Bedienungsanleitung Behringer XAir - XR12 (Seite 14 von 46) (Englisch)

660502

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

14 X AIR User Manual

4. Network Connection

The X AIR mixers oer convenient digital control of the various mixing functions

in three dierent ways - via Ethernet LAN, or wirelessly as a Wi Client or as an

Access Point. Selection is made with the REMOTE switch. You may view or change

the network preferences for these on any of the X AIR remote control applications

on the ’Setup/Network’ page.

4.1 IP Address and DHCP

Depending on the connection scenario, the X AIR mixers oer up to 3 options

for connecting a tablet or PC for software control – DHCP Client, DHCP Server,

andxed IP operation. Connection is achieved dierently depending on

whichoption you choose:

DHCP Client mode is available in Ethernet LAN or Wi Client operation.

Themixerwill automatically request an IP lease from the DHCP server that

ownsthe IPaddresses in the network to which you are trying to connect.

DHCP Server (DHCPS) is optionally available for Ethernet LAN connections and

is standard in Access Point operation. The mixer will own the IP addresses

and provide IP leases to devices requesting access to that network. The mixer

will always use IP address 192.168.1.1 and assign IP addresses 192.168.1.101 –

192.168.1.132 to its clients.

Static IP is available for Ethernet LAN and Wi Client operation. The mixer will

use the xed (static) IP address, subnet mask and gateway that you specify for

registering on the network. Make sure that the addresses you specify manually

are not conicting with any other addresses on the same network. We generally

recommend using the DHCP mode, unless you have a very specic reason to set

itup manually.

Note: Changing parameters of the currently selected connection mode

will disconnect the software from the console. If the console is erroneously

congured for a xed IP address that is incompatible with the network it is

connected to, the console will be inaccessible. In this case, one of the other

two connection modes can be used to regain access and amend the settings.

If that does not work, hold the Reset button for 2 seconds to return to default

networksettings.

Mixer name and Ethernet setup screen

4.2 Ethernet/LAN

This mode supports DHCP Client (default), DHCP Server, and xed IP operation.

Note that if the mixer is connected to a network where no DHCP server is

present, the mixer will generate an automatic IP address (range 169.254.1.0–

169.254.254.255). There are no security options for LAN connections,

soanydevice in that network may take control of connected X AIR consoles.

Whenconnecting via LAN/Ethernet to a Wi router, make sure the security

settings of that router prevent unauthorized access.

Wi Client setup screen

4.3 Wi Client

This mode supports DHCP Client (default) and xed IP operation. The X AIR mixers

can support WEP, WPA and WPA2 security mechanisms in Wi Client mode and

works on Wi channels 1-11.

Correct SSID (network name) and password need to be supplied to connect to an

existing network. WEP passwords have to be either 5 characters or 13 characters

long. If the supplied SSID and password are incorrect, the mixer cannot be

accessed. In this case the networking parameters have to be reset and another

connection mode has to be used to regain access.

The Ethernet connection mode may be used for conguration of the

WiClientmode. While being connected in Ethernet mode, the X AIR mixer can

scan the available wireless networks and display their SSID network names,

eldstrength and security method. By selecting the preferred wireless network,

this information can be copied to the applications’ Wi Client setup page

automatically. You will then be prompted to ll in the security password of that

network. After switching from Ethernet to Wi Client mode, the mixer should

connect to the selected wireless network automatically, and will be displayed by

remote applications on any device connected to the same network.

Access Point setup screen

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Behringer XAir - XR12 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Behringer XAir - XR12

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info