Bedienungsanleitung Behringer XAir - XR12 (Seite 15 von 46) (Englisch)

660502

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

15 X AIR User Manual

4.4 Access Point

This mode only supports DHCP Server operation with a maximum of

4clients, working on Wi channels 1-11. Security is supported via WEP 40-bit

(5ASCIIcharacters) or WEP 104-bit (13 ASCII characters). By default, the mixer

will use a network name consisting of the model name plus the last bits of the

mixer’s unique MAC address (e.g. XR18-17-BE-C0). The default IP address is

192.168.1.1 and no security is engaged.

The control software is available for Android and iPad tablets as well as Mac/

PC/Linux computers. Visit music-group.com to download the Mac/PC/Linux

software. The tablet software can be downloaded from the application store on

your device.

4.5 Getting Started

First Wi remote connection to your X AIR mixer

1. Download and install the remote control app for your device.

• Android smartphones/tablets: X AIR Android from the

Google Play* store

• iPad: X AIR for iPad from the App Store*

• PC: X AIR EDIT for Windows, Mac or Linux from behringer.com

2. Set the REMOTE switch on your X AIR mixer to ACCESS POINT mode and

power on the mixer.

3. Reset your X AIR mixer’s network settings to default values by holding

the RESET button for 2 seconds. This is located in the small hole above the

Wiicon and requires a paper clip or similar tool to reach.

4. Switch your remote control device on and open the network settings.

Android smartphones/tablets:

1. Start the Settings/Wireless & Networks dialog on your Android system.

2. Switch ’Wi ’ on.

3. Click on ’Wi ’ to select a network. From the list of networks, select your

X AIR mixer’s name, e.g. “XR18-19-1B-07”. After a few seconds, the status

should change to ’Connected’.

4. Open your X AIR for Android app and it will show similar information:

• Mix Access = All

• IP Address = 192.168.1.1

• Wi Lock = None

• Wi connected to XR18-19-1B-07

5. You may choose to lock the connection to this specic Wi network if you

want to ensure that your device cannot automatically connect to another

network while you are controlling your mixer.

6. Click on ’Connect’ and tap on the mixer’s name in order to connect the app

with your mixer. Note - if a warning pops up telling you that the mixer

rmware is not supported, it is recommended to update the rmware to

the latest version (see the product page on behringer.com for details).

Youcan,however, choose to connect anyway.

7. Once the app is connected to your mixer, all parameters will be

loaded automatically. Enjoy exploring all mixing functions of your

XAIRmixerremotely!

iPad:

1. Start the Settings/Wi dialog on your iOS.

2. Switch ’Wi’ on.

3. Select your X AIR mixer’s name from the list of networks, e.g.

“XR18-19-1B-07”. After a couple of seconds, the status should change to

’Connected’, indicated by a check mark.

4. Open your X AIR for iPad app and it will show any X AIR mixers (’Devices’)

found in that network, with their IP address, which in this case is 192.168.1.1.

5. Tap on the mixer’s icon to connect the app with your mixer. Note - if a

warning pops up telling you that the mixer rmware is not supported,

it is recommended to update the rmware to the latest version (see the

product page on behringer.com for details). You can, however, choose to

connect anyway.

6. Once the app is connected to your mixer, all parameters will be

loadedautomatically. Enjoy exploring all mixing functions of your X AIR

mixer remotely!

PC: X AIR EDIT for Windows, Mac or Linux

1. Open the Wireless Network Connections dialog on your operating system.

2. Make sure the ’WLAN’ or ’Wi ’ adapter is switched on.

3. View the list of wireless networks and select your X AIR mixer’s name,

e.g.“XR18-19-1B-07”. After a couple of seconds, the status should change

to’Connected’, indicated by a check mark.

4. Open your X AIR Editor for Mac/Win/Linux and click on ’Setup’.

Thelistwillshow any X AIR mixers found in that network, with their

nameand IPaddress, which in this case is 192.168.1.1.

5. Click on your mixer’s name, e.g. “XR18-19-1B-07”, and conrm to

synchronize from mixer to PC in order to connect the app with your mixer.

If a warning pops up telling you that the mixer rmware is not supported,

it is recommended to update the rmware to the latest version (see the

product page on behringer.com for details). You can, however, choose to

connect anyway.

6. Once the app is connected to your mixer, all parameters will be

transferred automatically. Enjoy exploring all mixing functions of your

XAIRmixerremotely!

*App Store is a service mark of Apple Inc. Google Play is a trademark of Google Inc.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Behringer XAir - XR12 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Behringer XAir - XR12

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info