Bedienungsanleitung Behringer XAir - XR12 (Seite 21 von 46) (Englisch)

660502

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

21 X AIR User Manual

6.3 Cong

1. Invert the phase with this button.

2. Press the Link button to link the adjacent channel for stereo operation.

3. Engage the 48 V phantom power by pressing and holding this button.

4. Adjust the analog input Gain with this control.

5. Engage an eect Insert and select the FX bus that will be inserted.

6. The source for the channel’s physical input and USB input can be selected

with these pull-down menus.

7. Select whether the analog input or USB input appears at this channel.

8. The S/E button appears at the top of many edit pages, and oers the option

to view a simple or expanded set of controls, especially for the Gate and

Dynamics pages.

9. Engage the Low Cut with this button to remove unwanted low frequencies.

10. Adjust the digital Trim for the USB input with this control.

6.4 Gate

The Gate tab allows a noise gate to be engaged and adjusted to remove

unwanted noise. Using the S/E button, a simple or expanded set of parameters

can be selected to accommodate various levels of mixing expertise. Presets can

also be selected from the folder icon to automatically load settings that suit

yourapplication.

1. Engage the gate with the ON button.

2. The function menu allows various types of gates to be selected. The

EXP 2, 3 and 4 settings create an extra-steep taper for signals that fall

below the threshold. The Gate setting enables a more aggressive drop in

volume for signals below the threshold. The Ducker setting attenuates the

signal by a predetermined amount whenever the signal rises beyond the

selectedthreshold.

3. Adjust the Threshold that the audio must reach in order to bypass the gate or

engage the Ducker.

4. The Range parameter adjusts the amount of attenuation for the

GateandDucker.

5. Adjust the Attack knob to set how quickly the gate takes eect when the

input signal drops below the threshold.

6. Adjust the Hold knob to set how long the input signal must surpass the

threshold before bypassing the gate.

7. Adjust the Release knob to set how quickly the gate releases after the audio

rises above the threshold.

8. Engage the key lter with the Key On button.

9. Select a low cut, high cut or mid peak frequency and bandwidth/slope for

the key lter.

10. Select the frequency for the key lter.

6.5 EQ

1. Engage the EQ with the ON button.

2. Engage the Lowcut button to remove unwanted low frequencies.

3. Select the type of EQ for the selected band. This menu will only be available

when one of the 4 bands are active, not including the lowcut.

4. Drag the band button left and right to determine the specic frequency,

andmove it up and down to determine the amount of boost or cut.

Useapinch or spread gesture (zoom in/out) to alter the bandwidth/Q.

5. Select the source for the RTA to display.

6. To automatically send the channel that you are currently editing to the RTA,

press the Follow button.

7. Press the Post button to display the post-EQ results in the RTA.

(2)

(5)

(3)

(1)

(6) (7)

(8)

(9)

(4)

(10)

(1)

(2)

(3)

(4)

(5) (6) (7)

(8)

(9)

(10)

(1)

(2)

(3)

(5)

(6)

(7)

(4)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Behringer XAir - XR12 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Behringer XAir - XR12

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info