Bedienungsanleitung Behringer XAir - XR12 (Seite 19 von 46) (Englisch)

660502

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

19 X AIR User Manual

5.12 Routing

The Routing page allows the analog and digital inputs and outputs to be

reassigned to dierent destinations. Select the group of inputs or outputs

you want to edit from the top row, then press the block to which you want to

reassigna channel.

5.13 Eects

The Eects page is accessed via the icon at the top of the main screen. There are 4

slots where various eects can be selected and adjusted to suit the application.

Press the folder icon to activate an eect block. Press Edit to select a dierent

eect, and press on the eect graphic to edit parameters. See the Eects

Descriptions chapter for more details.

5.14 Setup

The Setup page is accessed via the icon at the top of the main screen.

Thisallowsthe channel layout to be modied, a console reset, and network

settings tobeadjusted.

Press the Edit button to reorder the input, aux and eects channels. To return to

the standard conguration, press the Reset button. To reset the mixer to factory

settings, press the Initialize Mixer button, then press Yes to conrm.

The scribble strips are also edited on this page. Press a channel's blank box to

assign a color and name for that channel. The buses and eect blocks can

alsobeedited.

This screen allows the conguration of your wireless network connection.

SeetheNetwork Connection chapter for details.

The Audio/MIDI tab allows global settings for audio, MIDI and monitor options.

The console operates at 48 kHz by default, but can be changed to 44.1 kHz.

TheRTA can be switched from pre to post-EQ to monitor the eect of EQ

adjustments. Engage the 'Mute at Power On' function to avoid pops during start

up. When the Link option is selected, adjacent channels are paired together.

Aside from the fader settings being matched, the preamp, dynamics, EQ and

fader/mute/sends can also be aligned.

Activate the desired MIDI transmit and receive options for the physical MIDI ports

and the USB MIDI in the menu.

The solo options can be selected in the monitor section. Channels and buses

can be set to pre or after fader listen, and the solo bus level, trim and dimmer

attenuation can all be set.

5.15 Main EQ

There are 3 EQ options for the main and monitor buses: 6-band parametric,

graphic, and “true” EQ. These are accessed by pressing the PEQ/GEQ/TEQ buttons

on the right side.

This parametric EQ functions the same as the channel EQ, but there are

6bandsavailable.

The GEQ and TEQ types appear to be identical, but the “true” EQ compensates

for adjacent frequency adjustments. Most graphic equalizers have a multiplying

eect when several neighboring bands are boosted or cut, causing an

exaggerated EQ adjustment. The TEQ will have an EQ curve that is more indicative

of the actual adjustments made on the sliders.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Behringer XAir - XR12 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Behringer XAir - XR12

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info