Bedienungsanleitung Behringer XAir - XR12 (Seite 26 von 46) (Englisch)

660502

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

26 X AIR User Manual

7. The Noise Gate can be engaged and the threshold can be adjusted from this

page. More detailed controls are available on the Gate tab.

8. The Equalizer and Low Cut can be engaged here, as well as the

low cut frequency.

9. The Compressor can be engaged and its threshold adjusted here.

More detailed controls are available on the Comp tab.

10. The channel Aux Bus Sends can be adjusted here as well as the Sends tab.

11. The Main Out section allows the channel to be routed to or removed from the

main bus. The pan can also be adjusted, and the Auto Mix, DCA Group and

Mute Group assignments can be selected here as well.

7. 3 Input Tab

The Input tab allows adjustment of the most common preamp parameters as well

as specic routing for the input and insert.

1. The Stereo Link button allows a channel to be paired with the adjacent

channel in a stereo pair. The fader level, gain setting, bus sends, etc. will be

the same between the 2 channels, and the pan will default to hard left and

right. The odd-numbered channel will always be the lower of the pair.

2. The Polarity button inverts the phase.

3. The Phantom button engages the 48 V phantom power for use with

condenser microphones and active DI boxes.

4. The analog Mic Gain and digital USB Trim can be adjusted independently,

though only one source can be used at a time.

5. The analog input and USB input channels default to a 1:1 relationship to the

channel number, but can be re-routed using the pull-down menus.

6. Select whether the analog mic/line input or the USB input appears in

the channel.

7. Engage the Low Cut and adjust the specic frequency to remove

unwanted lows.

8. Click the FX button to engage an insert eect. The specic FX block is

selected with the adjacent pull-down menu.

7.4 Gate Tab

The Gate tab allows a noise gate to be engaged and adjusted to automatically

remove unwanted noise.

1. Select one of the 4 Presets to automatically optimize the parameters for one

of these common sources.

2. Engage the Noise Gate with this button.

3. Adjust the Threshold that the audio must reach in order to bypass the gate or

engage the ducker.

4. The Range parameter adjusts the amount of signal attenuation for the Gate

and Ducker settings.

5. Select the type of eect from the 5 options. Expander eects are available

with 2:1, 3:1 and 4:1 ratios which reduce the output by varying amounts,

allowing a natural sounding reduction of signals that don’t reach the

selected threshold. The Gate setting enables a more aggressive drop in

volume for signals below the threshold. An additional Range parameter

adjusts the amount of attenuation. The Ducker setting attenuates the signal

by an adjustable amount whenever the signal rises beyond the selected

threshold. The Range parameter adjusts the amount of attenuation for this

setting as well.

6. Adjust the Attack parameter to set how quickly the gate takes eect when

the input signal drops below the threshold.

7. Adjust the Hold parameter to set how long the input signal must surpass the

threshold before bypassing the gate.

8. Adjust the Release parameter to set how quickly the gate releases after the

audio rises about the threshold.

9. Engage the key Filter with this button.

10. Select the type of lter and frequencies with these faders.

11. Select a channel or bus for the side chain lter from the pull-down menu.

7. 5 EQ Tab

1. Engage the Low Cut and adjust the specic frequency to remove

unwanted lows.

2. Turn the equalizer on and o with the PEQ button. This maybe be labeled

dierently for bus equalizers because they also have graphic EQ options.

(2) (3) (8)(7)(1) (5) (6)(4)

(1)

(2) (3) (4) (6) (7) (8) (9) (11)(5) (10)

(1) (10) (11)(4)

(2) (3) (5)(6)

(12)

(7) (8) (9)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Behringer XAir - XR12 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Behringer XAir - XR12

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info