Bedienungsanleitung Behringer XAir - XR12 (Seite 38 von 46) (Englisch)

660502

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

38 X AIR User Manual

Stereo Tremolo

Stereo Tremolo creates an up and down volume change at a constant and even

tempo just like the guitar amps of yesteryear. Use the Stereo Tremolo to add a

unique “surf-music” texture to a vocal or instrument track.

SPEED adjusts the LFO rate and DEPTH sets the amount of modulation.

PHASEcanbe used to set an LFO phase dierence between the left and right

channel, which can be used for panning eects. The WAVE knob blends the

LFOwaveform between triangular and square shape. The signal envelope,

shaped by ATTACK, HOLD and RELEASE, can be used to modulate the LFO speed

(ENV SPEED) and the LFO modulation depth (ENV DEPTH).

Sub Octaver

The Sub Octaver provides two channels of sub harmonics generation, one or even

two octaves below the input signal.

Adjust the DIRECT knob to blend the “dry” signal with the lower octaves.

UsetheRANGE switch to optimize the tracking by selecting the frequency

rangeof the input signal. The OCT1 and OCT2 knobs adjust how much

1octavedown and 2octaves down content is included.

Delay + Chamber

Here we have combined Delay and Chamber reverb, so a single device can provide

a variety of delay settings, plus add just the right type and amount of reverb to

the selected signal. This device only uses one FX slot. (The Reverb is Inspired by

the Lexicon PCM 70)

Use the BALANCE knob to adjust the ratio between delay and reverb.

Lowfrequencies can be excluded with the LO CUT knob, and the MIX adjusts

how much of the eect is added to the signal. The TIME knob adjusts the delay

time for the left channel delay, and the PATTERN sets the delay ratio for the

right channel delay. Adjust the FEEDBACK and trim some high frequencies with

the FEED HC (high-cut) knob. The XFEED knob allows you to send the delay

sound to the reverb eect, so instead of running completely parallel, the reverb

aects the echos to a selected degree. The PREDELAY knob determines the

hesitation before the reverb aects the signal. The DECAY knob adjusts how

quickly the reverb fades. The SIZE controls how large or small the simulated

space is (room,cathedral, etc.). The DAMPING knob determines the decay of high

frequencies within the reverb tail.

Chorus + Chamber

Taking up only one FX slot, the Chorus + Chamber eect combines the shimmer

and doubling characteristics of a studio-grade Chorus with the sweet sound of a

traditional Chamber reverb. (Reverb is Inspired by the Lexicon PCM 70)

The BALANCE knob adjusts the balance between chorus and reverb.

Lowfrequencies can be excluded with the LO CUT knob, and the MIX knob adjusts

how much of the eect is added to the signal. SPEED, DELAY and DEPTH adjust

the rate, delay, and modulation depth of the chorus. The LFO PHASE between left

and right channel can be oset by up to 180 degrees, and WAVE adjusts the LFO

waveform from a sine wave to triangular wave. The PREDELAY knob determines

the hesitation before the reverb aects the signal. The DECAY knob adjusts how

quickly the reverb fades. The SIZE controls how large or small the simulated

space is (room, cathedral, etc.). The DAMPING knob determines the decay of high

frequencies within the reverb tail.

Flanger + Chamber

Add the mind-bending, lter-sweeping eect of a state-of-the-art Flanger to

the elegant sweetening of a traditional Chamber reverb — all in one FX slot.

(Reverbis Inspired by the Lexicon PCM 70)

The BALANCE knob adjusts the ratio between anger and reverb. Low frequencies

can be excluded with the LO CUT knob, and the MIX knob adjusts how much

of the eect is added to the signal. SPEED, DELAY and DEPTH adjust the rate,

delay,and modulation depth of the anger. FEEDback can be adjusted with

positive and negative amounts. The PHASE can be o set by up to 180 degrees.

The PREDELAY knob determines the hesitation before the reverb aects the

signal. The DECAY knob adjusts how quickly the reverb fades. The SIZE controls

how large or small the simulated space is (room, cathedral, etc.). The DAMPING

knob determines the decay of high frequencies within the reverb tail.

Delay + Chorus

This combination eect merges a user-denable Delay (echo) with a studio

quality Chorus sure to fatten up even the “skinniest” track. Uses only one FX slot.

(Inspired by the TC Electronic D-Two)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Behringer XAir - XR12 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Behringer XAir - XR12

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info