Bedienungsanleitung Beisler 2211-5 (Seite 73 von 103) (Englisch)

634034

Zoom out

Zoom in

Vorherige Seite

1/103

Nächste Seite

- D 73 -

Short Seam Automat 2211-5 Working Instructions Beisler Automated Sewing Equipment

Sewing program

A sewing program controls the entire machine operation

during production:

• transport of the sewing piece to the sewing head,

• tucking of a seam and

• ejection of the sewing piece.

A sewing program is determined by two different kinds of

values:

• global parameters,

• special parameters.

Sewing programs can be copied or renamed.

Seam number

Each sewing program can be executed with up to six

seams of different stitch widths. The seams are assigned

to the sewing program by seam numbers (01, 02, 03, 04,

05, 06).

The numeric string of the two-digit seam number is fre-

ely selectable.

Combination sewing program with seam

A sewing prgram can be combined with one seam, with

several seams or with all six seams.

If a sewing program with several seam numbers is reque-

sted, the seams are effected in the sequence of the seam

numbers from left to right.

The sequence of the seam number is freely selectable.

Memory

Sewing programs are stored in the memory (M).

The program control memory can contain up to 50 sewing

programs (M 01 - M 50) with up to six seams (01, 02, 03,

04, 05, 06) each.

All sewing programs stored in the memory can be copied

to the memory stick (backup copies).

Creating sewing programs

Basically, it is possible to create entirely new sewing pro-

grams; however, it is easier to:

• copy a factory-programmed sewing program to an un-

used location in the memory and to modify this pro-

gram,

• copy an already modified sewing program to an unu-

sed location in the memory and to adapt it further in

accordance with the intended purpose.

D.2

Fundamentals of programming

D.2.1 Program control layout

The program control is controlled using four different kinds

of menus:

1. System menu,

2. Service menu,

3. Global parameter menu,

4. Special parameter menu.

System menu

The system menu is used to perform all settings for the

program control operating system and for managing the

sewing programs:

• Copying factory settings to the program control unit,

• Saving programmed sewing programs to the memo-

ry stick,

• Copying and renaming sewing programs,

• Copying sewing programs from the memory stick to the

program control unit.

Service menu

The service menu is used to directly request service func-

tions. These functions support machine set-up or other

works required during machine operation, e.g. resetting

the day counter or winding the bottom thread.

Global parameter menu

This menu is used exclusively for setting the global pa-

rameters, i.e. parameters that control the basic functions

of the machine. Changing global parameters will result in

changes of seams of all stored sewing programs (e.g. time

for blowing off a finished sewing piece using compressed

air).

Special parameter menu

Special parameters are settings that refer only to one par-

ticular seam of a sewing program. Changing a special pa-

rameter will affect only the currently selected seam for

which a setting is made (e.g. stitch length of a seam).

The special parameter menu consists of several subme-

nus.

Special parameters can be functions that are enabled or

disabled as required or parameter values that are set in

lists.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Beisler 2211-5 Seite 73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Beisler 2211-5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info