Bedienungsanleitung Beisler 2211-5 (Seite 74 von 103) (Englisch)

634034

Zoom out

Zoom in

Vorherige Seite

1/103

Nächste Seite

Short Seam Automat 2211-5 Working Instructions

- D 74 -

Beisler Automated Sewing Equipment

D.2

Fundamentals of programming

D.2.1 Program control layout

Access to menus

The following menus are freely accessible:

• Service menu,

• Global parameter menu,

• Special parameter menu.

Except for three submenu pages, the entire system menu

is controlled by access privileges. These privileges pro-

tect the system menu from unauthorized access. Data

cannot be entered and the system menu cannot be mo-

dified unless the service code is entered. This code is

contained in the documentation delivered with the machi-

ne.

Menu level structure

Fig 2: The program control is divided into six menu levels

(start level and levels 1-5).

The system menu is requested from the start level. The

remaining operator prompting is achieved with plain text

in the submenus.

The service menus are requested directly from the start

level and from level 1.

The global parameter menu is requested from level 1,

the parameters pertaining to the menu are selected and

changed in a list.

The special parameter menu is requested from level 1

and edited in four other levels (levels 2-5) and in the per-

taining parameter lists.

CAUTION - Damage to machine!

Some of the menu entries start machine units or a

machine cycle.

This may damage machine components if the machine

is not ready for operation.

Do not enter data unless the machine is ready for

operation.

Factory setting

The program control of the machine is programmed at the

factory with a sewing program with three different seams.

Factory settings

The machine comes with a factory-installed standard pro-

gram M 01 with three seams (01, 02, 03) and M02 with

two seams (11, 12).

The seams of M01 differ in their control functions by se-

wing pocket edge and pocket bag:

• Seam 01: Clipping and crimping over of the left slash

selvage with subsequent sewing of the slash selvage

to the left trousers component.

• Seam 02: Sewing the slash selvage to the right trou-

sers component.

• Seam 03: Test seam that is restricted to two functions:

• Clamp movement from the insertion station to the

sewing head,

• Starting/ending the complete sewing process.

The test seam is used for checking the clamp trans-

port and the sewing process when the machine is set

up.

The standard program M 02 works with the two seams (11

and 12).

• Seam 11: Controls the procedure for sewing the side

pocket to the right trousers component.

• Seam 12: Controls the procedure for sewing the side

pocket to the left trousers component.

The standard program M 03 works with the two seams (19

and 20).

• Seam 19: Controls the procedure for sewing the

right slash selvage to the right trousers compo-

nent at ladies' trousers.

• Seam 20: Controls the procedure for sewing the

left slash selvage to the lefttrousers component at

ladies' trousers.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Beisler 2211-5 Seite 74

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Beisler 2211-5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info