Bedienungsanleitung BEKO B3D59644U (Seite 49 von 56) (Englisch)

817027

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

EN / 49

• The detergent in the main wash compart-

ment got wet while taking in the prewash

water. Holes of the detergent compart-

ment are blocked. >>> Check the holes

and clean if they are clogged.

• There is a problem with the detergent

drawer valves. >>> Call the Authorised

Service Agent.

• Detergent was mixed with the softener.

>>> Do not mix the softener with deter-

gent. Wash and clean the drawer with hot

water.

Detergent residue on the clothes.

• The machine might have been overloaded.

>>> Do not overload the machine.

• Wrong programme and temperature were

selected. >>> Select the proper pro-

gramme and temperature for the laundry

to be washed.

• Wrong type of detergent might have been

used. >>> Select the proper detergent for

the laundry to be washed.

Too much foam forms inside the

product. (**)

• Improper detergents for the washing ma-

chine is used. >>> Use detergents appro-

priate for the washing machine.

• Excessive amount of detergent is used.

>>> Use only sufficient amount of deter-

gent.

• Detergent was stored under improper

conditions. >>> Store detergent in a

closed and dry location. Do not store in

excessively hot places.

• Some meshed laundry such as tulle may

foam too much because of their texture.

>>> Use smaller amounts of detergent for

this type of item.

• Detergent was put in the wrong compart-

ment. >>> Make sure you place the de-

tergent in the appropriate compartment.

• Softener is being taken early by the

product. >>> There may be problem in the

valves or in the detergent drawer. Call the

Authorised Service Agent.

Foam is overflowing from the detergent

drawer.

• Too much detergent is used. >>> Mix 1

tablespoonful softener and ½ l water and

pour into the main wash compartment of

the detergent drawer. >>> Put detergent

into the product suitable for the pro-

grammes and maximum loads indicated in

the “Programme and consumption table”.

When you use additional chemicals (stain

removers, bleaches and etc.), reduce the

amount of detergent.

Laundry remains wet at the end of the

programme. (*)

• Excessive foam has occurred and auto-

matic foam absorption system has been

activated due to too much detergent us-

age. >>> Use recommended amount of

detergent.

Drying lasts too long.

• The machine might have been overloaded.

>>> Do not overload the machine.

• Spinning might not be sufficient for laun-

dry. >>> Select a higher spin speed in the

washing step of the Washer-Dryer.

• Tap is turned off. >>> Turn on the taps.

Laundry comes off wet after the drying

step.

• The programme selected might not be

suitable for the type of laundry. >>> Check

the care labels on clothes and select a

programme accordingly, or select timed

programmes additionally.

• The machine might have been overloaded.

>>> Do not overload the machine.

• Spinning might not be sufficient for laun-

dry. >>> Select a higher spin speed in the

washing step of the Washer-Dryer.

Machine does not start or programme

cannot be started.

• Power cable might be unplugged. >>>

Make sure that the power cable is plugged

in.

• Programme might not be set, or the Start/

Pause/Cancel button might be not

pressed. >>> Make sure the programme

is set and the machine is not in Standby

mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO B3D59644U Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info