Bedienungsanleitung BEKO DFN16430G (Seite 32 von 48) (Englisch)

762685

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

32/EN

Floor illumination

Warning to show that machine is in

washing phase

(depends on the model)

Your machine reflects a light to the floor

during the washing process. This light turns

off after the washing process is complete.

Floor illumination is activated

automatically when the washing

programme starts and remains lit until

the end of the programme.

Floor illumination cannot be cancelled

by the user.

Scheduling the washing time

Time Delay

If an economical electricity tariff is applied

in your region, you can use the Time

Delay function to wash your dishes during

appropriate hours.

You can delay the start of the selected

programme until 3-6-9 hours. Time Delay

cannot be set after the programme starts.

1. Press the Time Delay function key after

selecting the washing programme and

other auxiliary functions.

during the last washing programme

you used, Tablet function will remain

active in the next washing programme

you will select. If you do not want to

use these functions in the new program

you have selected, press the Tablet

Detergent key until the indicator of the

relevant function turns off.

Tablet Detergent function may cause

change in the programme duration.

SelfDry

(Depends on the Model)

“SelfDry” feature of your machine increases

drying efficiency of your machine and saves

energy. There are two options: "OFF" and

"ON".

To activate the feature of SelfDry:

1. Press SelfDry button. When the

function is active, the indicator showing

the selection of the function lights up.

2. SelfDry is activated.

When you activate this function, the door

of your machine opens automatically at the

end of the washing program.

To deactivate the feature of SelfDry:

1. Press the button of SelfDry. When the

function is deactivated, the indicator

showing the selection of the function

turns off.

2. SelfDry is deactivated.

SelfDry opens the door of the machine

at the end of the washing circle,

thanks to the "door opening shafts".

This process takes approximately 2

minutes. If the power fails while the

shafts are moving out, do not force

to close the door. When the power is

back, the process shall be completed,

and the shafts shall return to their initial

position.

The function of SelfDry may change

the duration of the selected program.

Interior Lighting

(depends on the model)

Some models have interior lighting to

illuminate the interior when the door is

opened.

1. After switching on your machine, press

and hold Time Delay and Program keys

simultaneously for 3 seconds.

2. Press and hold the program key until the

Rinse Aid indicator starts to flash. The

applicable options will be displayed on

the program indicator as follows:

Interior lighting ON - [P1]

Interior lighting OFF - [P3]

3. You can turn ON or OFF the interior

lighting with the time delay key.

4. Switch off the machine with the On/Off

key to save the changes.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO DFN16430G Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BEKO DFN16430G

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info