Bedienungsanleitung BEKO WMI 71641 (Seite 21 von 48) (Englisch)

528055

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Auxiliary functions

Auxiliary Function Selection Buttons

a b c d

• Dependingontheprogram,youcan

select the desired auxiliary function by

pressing the buttons a, b, c,d.

• Selecttherequiredauxiliaryfunctions

before starting the program.

• Somecombinationscannotbe

selectedtogether.Ex.:Pre-washand

Quick Wash.

• Symboloftheselectedauxiliary

function will light up.

Auxiliary function selection

If an auxiliary function that should not

be selected together with a previously

selected function is chosen, the first

selected function will be cancelled and the

last auxiliary function selection will remain

active.

Ex.:Ifyouwanttoselectpre-washfirst

and then quick wash, pre-wash will be

cancelled and quick wash will remain

active.

Auxiliary function that is not compatible

with the program cannot be selected.

(see,“ProgramSelectionTable”)

• Prewash

Whenyouselectthisfunction(a),the

displaywillindicate“F1”symbol.

• Apre-washisonlyworthwhilefor

heavily soiled laundry. Without

pre-wash you save energy, water,

detergent and time.

• Pre-washwithoutdetergentis

recommended for lace and curtains.

• Quick Wash

Withthisfunction(b),thewashtimeis

shortened.“F2”symbollightsuponthe

display.

• Usethisfunctionforsmalleramounts

or slightly soiled laundry.

• Extra Rinse

Whenthisfunction(c)isselected,washing

and rinsing is performed with plenty

ofwater.“F3”symbollightsuponthe

display.

• Anti-Creasing

Withthisfunction(d),drummovement

will be lessened to prevent creasing and

spinning speed is limited. In addition,

washing is carried out at a higher water

level.“F4”symbollightsuponthedisplay.

• Usethisfunctionfordelicatelaundry

that crease easily.

Whenever you select this auxiliary

function, load your machine with half

of the maximum laundry specified in

the program table.

• Rinse Hold

If you are not going to unload your clothes

immediately after the program completes,

you may use rinse hold function and keep

your laundry in the final rinsing water in

order to prevent them become creased

when there is no water in the machine.

Press“Start/Pause”buttonafterthis

process if you want to drain the water

withoutspinning.Programresumes.Your

machine drains the water and program

completes.

If you want to spin your laundry that you

leftinwater:

- Adjust the spin speed.

-PressStart/Pausebutton

Programresumes.Yourmachinedrains

the water, spins the laundry and program

completes.

Time display

The display shows the time remaining for

the program to complete while a program

is running. Time is displayed in hours and

minutes as “01:30”.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO WMI 71641 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info