Bedienungsanleitung BEKO WMI 71641 (Seite 23 von 48) (Englisch)

528055

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

special programs.

•

If the machine is not spinning, the

program may be in rinse hold mode

or the automatic spin correction

system has been activated due to an

excessive unbalanced distribution of

laundry in the machine.

Changing the selections after

the program has started

The selected spin speed and program

temperature fade out. An empty frame

appears.

Whenthe“Programselection”buttonis

brought to the appropriate position, rpm

and temperature data reappear.

Switching the machine to

standby mode

The machine is switched to standby

modebypressing“Start/Pause/Cancel”

button momentarily. The Standby symbol

which indicates the machine is in standby

mode lights up and the start symbol that

shows the program has started and is still

continuing fades out.

Selecting or cancelling an auxiliary

function in pause mode

Auxiliary functions can be cancelled or

selected in accordance with the step the

program is at.

Adding/removing laundry in pause

mode

The door can be opened if the water

level is suitable. The door locked symbol

will light up until the door is suitable for

opening. This symbol will fade out as soon

as the door is allowed to open. Laundry

may be added / taken out by opening the

door.

Door lock

The Door Locked Symbol lights up when

the loading door is locked. This symbol

will flash until the door is allowed to open.

Do not force the door at this stage. This

symbol will fade out as soon as the door is

allowedtoopen.Youmayopenthedoor

after the symbol fades out.

Child-proof lock

Protecttheappliancefrombeingtampered

by children by means of the child-proof

lock. In this case, no change can be made

in the running program.

Yourmachinecanbeturnedonand

offwithOn/Offbuttonwhilethechild-

proof lock is activated. In this case,

your machine will resume its program

with child-proof lock activated.

The machine is switched to child-lock

by pressing the 2nd and 4th auxiliary

functionsfor3sec.“C:on”(Child-proof

lockisactivated)labelappearsonthe

display.

The same symbol will also be displayed

whenever any button is pressed while the

machine is child-locked.

To deactivate the child-proof lock, press

the 2nd and 4th auxiliary function buttons

for 3 sec.

“C:OFF”(Child-prooflockisdeactivated)

label appears on the screen.

Ending the program through

cancelling

“Start/Pause/Cancel”buttonispressed

for 3 seconds to cancel the program.

Start symbol will flash during cancellation.

After cancellation, the symbol of the

corresponding step at which the

cancellation was made will remain lit and

“End”willappearonthescreen.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO WMI 71641 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info