Bedienungsanleitung BEKO WTV7712BLS1 (Seite 7 von 56) (Deutsch, Englisch)

757506

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

7 / EN Washing Machine / User Manual

1 Tighten the nuts of the hose by hand.

Never use a tool when tightening the nuts.

2 When hose connection is completed,

check whether there is leak problems at the

connection points by opening the taps fully. If

any leaks occur, turn off the tap remove the

nut. Retighten the nut carefully after checking

the seal. In order to prevent the water leaks

and resultant damages, keep the taps closed

when you do not use the product.

4.1.5 Connecting the drain

hose to the drain

• Attach the end of the drain hose directly to

waste water drain, lavatory or bathtub.

CAUTION!

• Your drain house will be flooded if the

hose comes out of its housing during

water discharge. Moreover, there is risk of

scalding due to high washing temperatures!

In order to prevent such situations and

make sure that the machine performs water

intake and discharge processes without

any problem, fix the drain hose securely.

40 cm

100 cm

• Connect the drain hose to a minimum height

of 40 cm and a maximum height of 100 cm.

• In case the drain hose is elevated after laying

it on the floor level or close to the ground

(less than 40 cm above the ground), water

discharge becomes more difficult and the

laundry may come out excessively wet.

Therefore, follow the heights described in

the figure.

• To prevent the waste water to go back

into the machine again and to ensure easy

drainage, do not immerse the end of the

hose into the waste water or do not insert

it into the drain for more than 15 cm. If it is

too long, cut it short.

• The end of the hose should not be bent,

it should not be stepped on and the hose

must not be pinched between the drain and

the machine.

• If the length of the hose is too short, use

it by adding an original extension hose.

Length of the hose may not be longer than

3.2 m. To avoid water leak failures, the

connection between the extension hose and

the drain hose of the product must be fitted

well with an appropriate clamp as not to

come off and leak.

4.1.6 Adjusting the feet

CAUTION!

• In order to ensure that the product

operates more silently and vibration-free, it

must stand level and balanced on its feet.

Balance the machine by adjusting the feet.

Otherwise, the product may move from

its place and cause crushing and vibration

problems.

• Do not use any tools to loosen the lock

nuts. Otherwise, they will get damaged.

1 Loosen the lock nuts on the feet by hand.

2 Adjust the feet until the product stands in a

stable and balanced way.

3. Tighten all lock nuts by hand again.

4.1.7 Electrical connection

Connect the product to a grounded outlet

protected by a 16 A fuse. Our company shall

not be liable for any damages that will arise

when the product is used without grounding in

accordance with the local regulations.

• Connection must comply with national regulations.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO WTV7712BLS1 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BEKO WTV7712BLS1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info