797069
39
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
5Diagnostic
Problem cause Solution
The programs do not
can't start
after closing the
loading door.
You have not pressed the Start/Pause/
Cancel button.
• Press the Start/Pause/Cancel
button.
In case of excessive loading, it will be
difficult for you to close the loading door.
• Reduce the amount of laundry and
make sure the loading door is
properly closed.
Unable to launch
or select the
program.
The machine has gone into safety mode
due to problems with the power supply
(circuit voltage, water pressure, etc.).
• To cancel the programme, use the
program selector to choose another
programme. The previous program
will be cancelled. (See “Program
Cancellation” section)
Water inside the
machine.
There may be water left in your machine as a
result of quality assurance processes carried
out during production.
• This is not a problem and does not affect
your machine in any way.
The machine does not suck up
water.
The tap is closed. • Open the taps.
The water inlet hose is bent. • Straighten the pipe.
The water inlet filter is clogged. • Cleaning the filter.
The loading door is not closed. • Close the door.
The machine does not drain
the water.
The drain hose may be clogged or twisted. • Clean or straighten the pipe.
The pump filter is clogged. • Cleaning the pump filter.
The machine vibrates or
makes noises.
The machine is not in balance. • Balance the machine by adjusting the feet.
A hard substance has entered the
pump filter.
• Cleaning the pump filter.
The transport safety screws have
not been removed.
• Remove the transportation safety
screws.
The amount of laundry in the machine
is too low.
• Add laundry to the machine.
The machine is overloaded. • Remove a quantity of laundry
from the machine or distribute it
manually in order to balance it
evenly in the machine.
The machine is resting on a rigid object. • Make sure that the machine is not placed
on any object.
Water is leaking from the bottom of
the machine.
The drain hose may be clogged or twisted. • Clean or straighten the pipe.
The pump filter is clogged. • Cleaning the pump filter.
The machine stopped
right after starting the
program.
The washing machine has stopped
temporarily due to low voltage.
• It can resume operation when the
voltage returns to the normal
level.
The machine drains
the water it takes
directly.
The height of the drain hose is not
appropriate.
• Connect the water drain hose
as indicated in the user
manual.
No water is visible in
the machine during
washing.
The water is in the invisible part of the
device.
• This is not a problem.
39 / EN Washing machine / User manual
39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für BEKO WTV8716 XBWST wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von BEKO WTV8716 XBWST

BEKO WTV8716 XBWST Bedienungsanleitung - Holländisch - 36 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info