Bedienungsanleitung Belion GK604ZB10 (Seite 5 von 28) (Englisch, Holländisch)

630725

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Removing the appliance

Close the gas supply to the appliance and disconnect the

appliance from the electricity supply.

You can remove the appliance by pushing it upwards from the

bottom.

Set-up, gas and electricity connection

Gas connection

Installation must only be performed by an approved expert or a

licensed after-sales service engineer in accordance with the

instructions specified in the "Installation instructions".

For the licensed expert or after-sales service

Caution!

The setting values for this appliance are specified on the rating

plate on the back of the appliance. The gas type set in the

factory is marked with an asterisk (*).

If the star symbol appears next to the label "NG", the appliance

is set up for natural gas, and if it appears next to "LPG", the

appliance is set up for liquefied gas.

Caution!

Before connecting the appliance, check whether the local

connection conditions (gas type and pressure) correspond to

the appliance settings. If a change to the appliance settings is

necessary, make the change with the aid of the instructions in

the "Installation instructions".

Caution!

This appliance is not connected to a waste gas main. It must be

connected and commissioned in accordance with the

installation conditions. Do not connect the appliance to a waste

gas main. All ventilation regulations must be observed.

Caution!

The gas connection must be made via a fixed, i.e. not mobile

connection (gas line) or via a safety hose.

Caution!

If using the safety hose, ensure that the hose is not trapped or

crushed. The hose must not come into contact with hot

surfaces.

Caution!

The gas connection must have an easily accessible locking

device.

Safety information

The nominal operating pressure of the appliance is:

for natural gas (G20) 20 mBar, for natural gas (G25) 25 mBar,

for LPG (G30) 30 mBar, for LPG (G31) 37 mBar. The appliance

must be operated at these pressure values. All data on the

rating plate of your appliance relates to these pressure values.

The manufacturer is not responsible for results, performance or

any risk caused by operating the appliance at different values.

: If the gas pressure in your gas supply grid!

for natural gas (G20) is higher than 25 mBar, for natural gas

(G25) is higher than 30 mBar, for LPG (G30) is higher than 36

mBar, for LPG (G31) is higher than 45 mBar, you must use

your appliance in conjunction with a suitable gas regulator, for

safety reasons. Connection, maintenance and configuration of

the gas regulator must be performed by an authorised

installation expert. If you do not know the gas pressure in your

gas supply grid, please ask your local supply grid operator.

Faults in the gas installation/smell of gas

If you notice a smell of gas or faults in the gas installation, you

must:

: WHAT TO DO IF YOU SMELL GAS!

Escaping gas may cause an explosion.

If you smell gas or notice any faults in the gas installation:

■ Immediately shut off the gas supply or close the gas cylinder

valve.

■ Immediately extinguish all naked flames and cigarettes.

■ Do not use any light or appliance switches and do not pull

any plugs out of sockets. Do not use any telephones or

mobile phones within the building.

■ Open windows and ventilate the room.

■ Call the aftersales service or the gas supplier.

Electrical connection

Caution!

■ Have the appliance set up by your after-sales service. A 16 A

fuse is required for connection. The appliance is designed for

operation at 220-240 V.

■ If the electricity supply drops below 180 V, the electrical

ignition system does not work.

■ Any damage arising from the appliance being connected

incorrectly will invalidate the guarantee.

■ If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified persons

in order to avoid a hazard.

For the after-sales service

Caution!

The electrical connection must only be carried out by a

licensed service technician. Observe the instructions of the

relevant electricity provider.

Caution!

The appliance must be connected in accordance with the data

on the rating plate.

Caution!

The mains voltage must correspond to the voltage specified on

the label or rating plate.

Caution!

Only connect the appliance to an electrical connection that

meets the applicable provisions. The socket must be easily

accessible so that you can disconnect the appliance from the

electricity supply if necessary.

Caution!

Please ensure the availability of a multi-pin disconnecting

system.

Caution!

Never use extension cables or multiple plugs.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Belion GK604ZB10 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Belion GK604ZB10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info