Bedienungsanleitung Bellelli Augusto (Seite 11 von 42) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

772354

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

How to adjust the height of the safety harness

Group 0+ Place the child seat on the ground.

Tilt the child seat completely

backwards.

Place the child in the child seat.

Make sure that the harness is adjusted

to the closest position to the child's

shoulders and preferably positioned

just above the child's shoulders (fig. 2).

Group 1 Place the child seat on the ground.

Make sure the car seat is fully upright.

Place the child in the child seat.

Make sure the harness is adjusted

to the closest position to the child's

shoulders and preferably positioned

just above the child's shoulders (fig. 3).

How to move the child seat’s safety harness (fig. 4

– 10)

Tilt the child seat completely backwards.

Press the adjuster (C) and simultaneously pull both

safety harness straps (fig. 4).

Release one safety harness strap from the T-shaped yoke

(P) located behind the backrest of the car seat (fig. 5).

Pull out the harness from the backrest (fig. 6).

Pull out the metal yoke (O) from the backrest (fig. 7).

Insert the metal yoke (O) (fig. 8) and the harness at the

desired height (fig. 9).

Fasten the harness to the T-shaped yoke (P) (fig. 10).

Repeat these steps with the other strap.

Pull the adjuster strap (D) after carrying out all the

steps.

Warning: make sure that the harness straps pass

through the padding (L) and that the rubber part is facing

the child’s body.

Warning: make sure that the harness straps are not

twisted and that the metal buckle cannot slide off of the

backrest.

Adjusting the tilt of the child seat (fig. 11)

Push the tilt adjustment handle upwards (E) and at the

same time move the child seat forwards or backwards

until it reaches the desired tilt (fig. 11).

Warning: after releasing the handle, always check

to make sure the child seat is locked into the chosen

position.

How to use the child seat (fig. 12)

Group

Position of the child seat on the car

seat (fig. 12)

0+ not facing the vehicle's direction of

travel.

1 facing the vehicle's direction of travel.

Position the child seat on one of the vehicle’s back seats

or on the front passenger seat.

Warning: in some countries, the Highway Code prohibits

the use of child seats on front seats: check the Highway

Code of the country you are driving in.

Warning: do not use the child seat on the front seats if

there is an active airbag (only for Group 0+).

Warning: do not place the child seat on a seat that is only

fitted with a lap belt.

Warning: do not put anything between the child seat and

the car seat.

How to install the child seat (fig. 13 – 20)

Group 0+ (up to 13 kg) (fig. 13 - 17)

Warnings: Use the newborn insert (B) for children

less than three months old.

Warning: the child seat must not face the vehicle’s

direction of travel.

Warning: do not use the child seat on the front seats if

there is an active airbag.

How to install the child seat (fig. 13 – 17)

Tilt the child seat completely backwards.

Position the child seat on the car seat by pushing it

against the backrest (fig. 13).

Make sure the base (H) is well positioned on the car

seat.

Warning: The areas where the seat belts need to be

inserted are marked in blue. Do not insert the car’s seat

belts in positions other than the indicated ones.

Identify the areas where the car’s seat belt needs to be

inserted.

Pass the seat belt between the base (H) and the seat

(A) (fig. 14).

Close the car seat belt.

Pass the lap section of the car’s seat belt through both

guides (G) located at the front of the base (fig. 15).

Pass the diagonal section of the car’s seat belt through

the guides (K) located at the back of the base (fig. 16).

Fasten the blue belt lock (F) around the car’s seat

belt, as close as possible to the buckle (fig. 17).

Warning: the car’s seat belts must be tightened to

prevent the child seat from moving.

Warning: make sure the car’s seat belt is not twisted.

SUGGESTIONS

If the car's seat belt seems to be too short:

• makesurethechildseathasbeenpushedproperly

against the car seat's backrest;

• ifpossible,movethecarseatbackwardsasfaras

you can;

• ifpossible,adjusttheheightofthecar'sseatbelts

to the lowest position.

How to remove the child seat from the car

Release the car’s seat belt.

Pull out the seat belt from the child seat and allow it to

retract.

Group 1 (from 9 to 18 kg) (fig. 18 – 20)

Warning: the child seat must face the vehicle’s direction

of travel.

How to install the child seat (fig. 18 – 20)

Position the child seat on the seat of the vehicle so that it

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bellelli Augusto Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info