Bedienungsanleitung Bellelli Augusto (Seite 12 von 42) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

772354

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

rests completely on the seat and against the backrest.

Warning: The areas where the seat belts need to be

inserted are marked in red. Do not insert the car’s seat

belts in positions other than the indicated ones.

Pass the car’s seat belt between the base and the seat

(fig. 18).

Fasten the car’s seat belt.

Place the lap section of the car’s seat on the area (I) at

the base of the frame (fig. 19).

Insert the diagonal section of the car’s seat belt in the

belt lock (J) located on the same side of the buckle of the

car’s seat belt (fig. 20).

How to remove the child seat from the car

Release the car’s seat belt.

Pull out the seat belt from the child seat and allow it to

retract.

How to use the child seat (fig. 21 – 26)

How to position the child (fig. 21 – 26)

Press the adjuster (C) and simultaneously pull both the

harness straps of the child seat (fig. 21).

Press the red buckle button (M) to open it (fig. 22).

Move away the buckles and place them on the sides of

the child seat (fig. 23).

Place the child in the child seat.

Bring the two hooks of the belt together.

Insert the joined hooks in the buckle (M) (fig. 24). A click

indicates that the buckle has been fastened properly.

Position the padding sections (L) on the shoulders and

chest of the child and pull them completely (fig. 25).

Pull the front adjuster strap (D) to fit the safety harness

close against the child’s body (fig. 26).

Warning: During the journey periodically check that the

child has not freed himself from the child seat.

How to release the child from the seat (fig. 21 – 22)

Press the adjuster (C) located underneath the seat and

simultaneously pull both the harness straps of the child

seat (fig. 21).

Press the red buckle button (M) to open it (fig. 22).

Take out the harness straps and take them off the child.

Maintenance and disposal

Remove the covers completely to wash them.

How to remove the cover:

Press the red buckle button (M) to open it.

Tilt the child seat completely backwards.

Press the adjuster (C) and simultaneously pull both

safety harness straps.

Release one safety harness strap from the T-shaped

yoke (P) located behind the backrest of the car seat.

Pull out the strap from the backrest.

Pull out the metal yoke (O) from the backrest.

Repeat these steps with the other strap.

Remove the fabric.

Repeat the steps above in reverse order to place the

cover back on the child seat.

Warning: after placing back the cover, carefully check the

straps (N) and padding (L) have been fitted in properly.

Follow the washing instructions reported on the label

attached to the fabric.

Wash plastic parts using warm water and soap. Do not

use aggressive detergents.

Warning: The covers are an integral part of the child seat:

the seat must not be used without the covers. The covers

must only be replaced with original spare parts.

For a lower environmental impact, we recommend

disposing of the parts by following the guidelines

provided by your local authority. Check the detailed list

of the materials used (fig. 1).

Warranty

Warranty terms and conditions are available on the

website: www.bellelli.com.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bellelli Augusto Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info