Bedienungsanleitung Bellman Symfon BE2030 - Mino (Seite 6 von 11) (Deutsch)

747147

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

106

107

APP

Appendix

Settings

Bellman Audio Mino has more settings than those you can access in user mode.

By going into the Settings Menu you can adjust settings that you do not normally

need to change or which are adjusted when rst used and never need to be

changed again.

Settings Menu

How to get into the Settings Menu.

• Start the unit by pressing the On/O button

i (6).

• Hold down the On/O button

i (6) and press down the Volume - button

(10) within 1 second until the T LED (4) starts to blink.

• When the T LED (4) starts to blink, you can release both the buttons.

• Press and hold down the T button (7) within 2 seconds of the moment the T

LED (4) starts to blink.

• Release the T button (7) immediately once the T LED (4) has gone out.

You are now in Balance Control mode.

Overview of the Settings Menu

In the Settings Menu you can switch

between the dierent settings by

pressing the T button (7) or

the

M button (5). Each

press of the T button

moves you clockwise on

to the next setting in the

list and the

M button

takes you anti-clockwise

to the previous setting in

the list.

When you have nished

adjusting your settings,

give a short press on the

On/O button

i (6) to

return to normal user

mode.

Balance control

The balance between the right and left-hand channels can be

set to compensate, for example, for a hearing loss in one ear.

Press the

< button (11) to adjust the balance on the left and the >

button (12) to adjust the balance on the right.

The standard setting is centered balance.

Basic attenuation

Dierent headphones have dierent sensitivity levels and you can

compensate for this with basic attenuation. What you actually set

is the attenuation you require at the maximum power output you

want to have (which is therefore 0 dB attenuation). This setting is

useful when you want to adjust the maximum volume in user mode

for a pair of headphones or in-ear phones with a higher sensitivity

than the BE9122 Bellman Stereo Headphones or, for example, if you

want to limit the volume for a child.

Use the

> button (12) to reduce the basic attenuation (increase the

volume) and the

< button (11) to increase the basic attenuation

(reduce the volume). The basic attenuation is adjusted in incre-

ments of 3 dB.

The standard setting is 0 dB attenuation, which corresponds to the

maximum output signal.

Stereo/Mono

The line-in signal can be rendered in either Stereo or in Mono.

The intelligibility of speech can be increased in certain listening

situations, such as when watching TV, if the signal is in Mono.

Press the

+ (9) button to select Stereo.

Press the

- (10) button to select Mono.

The standard setting is Stereo.

Bass reduction

Low-frequency interference such as fans and road noise can be

tiring if you are exposed to it for a long period. By activating bass

reduction, low-frequency interference and sounds are reduced.

Press the

+ (9) button to select Bass Reduction.

Press the

- (10) button to deactivate Bass Reduction and get

level frequency response.

The standard setting is deactivated Bass Reduction.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bellman Symfon BE2030 - Mino Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bellman Symfon BE2030 - Mino

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info