Bedienungsanleitung Bellman Symfon BE2030 - Mino (Seite 7 von 11) (Deutsch)

747147

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

108

109

APP

Adjusting the Tone Control

The Tone Control Blocking function has been developed in case you

want to make it easier for the user to use Mino. This setting can be used

to choose whether or not the user should be able to adjust the Tone

Control. If you choose to switch o the tone control buttons, you can

preset the Tone Control that will be used in user mode.

Activation and deactivation of Tone Control in User Mode

Press the

+ (9) button to activate the Tone Control buttons.

Press the

- (10) button to deactivate them.

The standard setting is Tone Control activated.

Presetting the Tone Control

Press the

< button (11) and the > button (12) to preset the Tone Control

to the level that will be used in user mode.

The standard setting is Tone Control centered (level frequency response)

Please note that if the Tone Control is activated, the preset value will be

changed as soon as the Tone Control is changed in user mode.

Blocking the T position

The T position can be blocked if you know that the T position will

not be used. This setting is for those who will never use the

T position and want to avoid selecting this position by mistake.

Press the

+ (9) button to activate the T position.

Press the

- (10) button to deactivate the T position.

The standard setting is activated T position.

Resetting to the factory setting

You can use this to reset all settings to the standard settings

the product was delivered with from the factory.

Press and hold down the

+ button (9) until all the LEDs on the

display (8) are lit. After resetting is completed, the display will

blink for a short period.

Version information

The product version information is presented here via a pattern

of lit and blinking LEDs. This internal information is only intended

as an aid for servicing and support.

Testing

It is easy to test Mino yourself. If Mino is not working as described below, you can

carry out further troubleshooting as instructed in the Troubleshooting section

below.

How to test

The testing of Mino has been divided into three parts. One part for internal micro-

phones, one part for external sound and nally one for charging.

Internal microphones

• Switch on the unit and make sure that the Battery Status LED (3) lights

up green.

• Connect the headphones to the Headphone Socket (13) and scrape

carefully on the round microphone (1) with your nger and check that

there is a scraping sound in the headphones.

• Press the

M button (5) and make sure that the MIC LED (2) changes

colour and lights up orange.

• Carefully scrape the small microphone hole on the top (1) and the round

microphone (1) with your nger and check that there is a scraping sound

in the headphones.

• Press the buttons (9, 10, 11, 12) and check that the Volume and Tone LED

indicator changes.

External sound

• Press the T button (7) and make sure that the External Sound LED (4) lights up

green.

• Hold the unit against an electrical watch with mechanical hands

(with built-in battery) and check that it ticks.

• Connect an external sound source to the External Sound Source Input (16)

and check that the sound from the sound source is heard in the headphones.

The External Sound Source Input (16) can be tested, for example, by con-

necting a CD player or a radio to the input via a BE9126 audio cable. The unit

automatically switches to an external sound source when a connector is con-

nected to the External Sound Source Input (16).

Charging

• Ensure that Mino is switched o.

• Connect the charger to the mains socket.

• Connect the charging cable to both the charger and the unit’s charging

socket (14), see the fold-out section of the manual.

• Check that the unit’s Battery Status LED lights up.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bellman Symfon BE2030 - Mino Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bellman Symfon BE2030 - Mino

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info