Bedienungsanleitung Benning IT 101 (Seite 20 von 142) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch, Schwedisch)

577353

Zoom out

Zoom in

Vorherige Seite

1/142

Nächste Seite

02/ 2011

BENNING IT 101



3. Scope of delivery

The scope of delivery for the BENNING IT 101 comprises:

3.1 one BENNING IT 101

3.2 two safety measuring leads, red/ black (L = 1.2 m)

3.3 two safety alligator clip, red/ black, 4 mm plug-in system

3.4 one switchable probe tip with integrated TEST key (part no. 044115)

3.5 one rubber protection frame

3.6 one magnetic holder with adapter and strap (part no. 044120)

3.7 one compact protective pouch

3.8 four mignon batteries 1.5 V/ type AA according to IEC LR6 and one fuse

(fitted in unit as initial equipment),

3.9 one operating manual

Parts subject to wear:

- The BENNING IT 101 contains a fuse as protection against overload:

One fuse, nominal current rating 315 mA (1000 V), 10 kA, FF, D = 6.3 mm,

L = 32 mm (part no. 757213)

- The BENNING IT 101 is powered by four mignon batteries 1.5 V/ type AA

according to IEC LR6.

4. Description of the appliance tester

See figure 1: Front side of the instrument

See figure 2: Digital display

The display and operator control elements specified in Fig. 1 and 2 are desig-

nated as follows:

Sensor, of the automatic background lighting

Digital display

A AUTO SENSE, for automatic detection of DC and AC voltage,

B Digital display, for the measured value and analogue bar graph display,

C TEST, appears when the measuring function for insulating resistance and

low resistance is activated,

D LOCK (latching), permits continuous measurement of insulating resistance

and low resistance,

E APO, Auto Power Off is activated,

F LPF, is indicated with the low-pass filter being activated,

G AC/ DC, is indicated when a DC or AC voltage is measured,

H , is indicated in case of compensation (null balance) of the measuring

leads,

I< Range indication,

J COMPARE, is indicated in case of the comparative function of insulating

resistance measurement,

K DAR, is indicated if the measurement of the dielectric absorption rate is

activated,

L PI, is indicated if the measurement of the polarization index is activated,

M Testing voltage indication, is indicated when the insulating resistance is

measured,

N Clock, measuring time of the PI / DAR measurement,

O Battery condition indicator „ “, appears when the battery is dis-

charged,

P Overflow,

Q Polarity indication,



(high-voltage indicator), is indicated if a dangerous voltage is applied,

S MEM, is indicated when an internal memory of measured values is acti-

vated,

Key (blue), change-over key for the secondary function,

COMP key, activates the comparative function for insulating resistance

measurement,

STORE / RECALL key, storage and call of measured values,

LOCK (latching)/ PI/DAR key, permits continuous measurement of insu-

lating resistance and low-resistance as well as activates the measurement of

the dielectric absorption rate and of the polarization index,

Green LED (PASS), lights up, if the measured value exceeds the compara-

tive value (resistance value) in the COMP mode,

TEST key, activates the measurement of the insulating resistance and of

the low-impedance resistance,

Red LED (high-voltage control indicator), lights up if a dangerous voltage

is applied,

J Rotary switch, for selecting the measuring function,

K Ω socket, for resistance and low-resistance measurement,

L Jack (positive), for measuring voltages and insulation, polarization index

(PI), dielectric absorption rate (DAR),

M COM jack, common jack for measurements of voltage, resistance, low-

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Benning IT 101 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info