Bedienungsanleitung Benning IT 101 (Seite 22 von 142) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch, Schwedisch)

577353

Zoom out

Zoom in

Vorherige Seite

1/142

Nächste Seite

02/ 2011

BENNING IT 101



30 V AC/ DC is connected to the input of the instrument.

5.1.18 Temperature coefficient of the measured value: 0.15 x (stated measur-

ing precision)/ °C < 18 °C or > 28 °C, related to the value for the refer-

ence temperature of 23° C.

5.1.19 The BENNING IT 101 is powered by four 1.5 V mignon batteries (IEC

LR6/ type AA).



As soon as the battery symbol

O is indicated, the batteries

must be replaced by new ones immediately in order to prevent

danger for persons due to incorrect measurements.

5.1.20 With new batteries the BENNING IT 101 can make approx.:

- 2600 low-resistance measurements (according to EN 61557-4)

[1 Ω, for a measuring duration of 5 sec.] or

1100 insulating resistance measurements (1000 V) (according to EN

61557-2) [1 MΩ, for 1000 V and a measuring duration of 5 sec.]

5.1.21 Appliance dimensions:

(L x B x H) = 200 x 85 x 40 mm without rubber protection frame

(L x B x H) = 207 x 95 x 52 mm with rubber protection frame

Appliance weight:

470 g without rubber protection frame

630 g with rubber protection frame

5.1.22 The safety measuring leads supplied are expressly suited for the rated

voltage and the rated current of the BENNING IT 101.

5.1.23 The BENNING IT 101 is protected by a rubber protection frame N

against mechanical damage. The rubber protection frame allows the

BENNING IT 101 to be set up or hung up during the measurements.

6. Ambient conditions

- The BENNING IT 101 is intended for making measurements in dry environ-

ment,

- Maximum barometric elevation for making measurements: 2000 m,

Overvoltage category/ setting category: IEC 61010-1 → 600 V category IV,

- Contamination class: 2,

- Protection class: IP 40 (DIN VDE 0470-1 IEC/ EN 60529)

IP 40 means: Protection against access to dangerous parts and protection

against solid impurities of a diameter > 1 mm, (4 - first index). No protection

against water, (0 - second index).

- EMC: EN 61326-1

- Operating temperature and relative humidity:

For operating temperatures from 0 °C to 30 °C: relative humidity less than 80 %

For operating temperatures from 31 °C to 40 °C: relative humidity less than 75 %

For operating temperatures from 41 °C to 50 °C: relative humidity less than 45 %

- Storage temperature: The BENNING IT 101 can be stored at any tempera-

ture within the range of - 20 °C to + 60 °C (relative humidity from 0 to 80 %).

The battery should be removed from the instrument for storage.

7. Electrical specifications

Note: The measuring accuracy is specified as the sum of

- a relative fraction of the measured value and

- a number of digits (counting steps of the least significant digit).

The specified measuring accuracy is valid for temperatures within the range of

18 °C to 28 °C and for a relative humidity lower than 80 %.

7.1 Voltage measuring range (Switch setting V)

Measuring range Resolution Accuracy

600 V DC 0.1 V ± (1.0 % of the measured value + 5 digits)

600 V AC 0.1 V

± (1.5 % of the measured value + 5 digits)

in frequency range 50 Hz - 60 Hz

± (2.0 % of the measured value + 5 digits)

in frequency range 61 Hz - 500 Hz

600 V AC

with low-pass filter (LPF)

0.1 V

± (1.5 % of the measured value + 5 digits)

in frequency range 50 Hz - 60 Hz

± (5.0 % of the measured value + 5 digits)

in frequency range 61 Hz - 400 Hz

Optical warning in case of dangerous voltages of 30 V AC/ DC and more ()

Min. measuring voltage: 0.6 V (AC)

Overvoltage protection: 600 V RMS or DC

Limiting frequency of the low-pass filter (LPF): 1 kHz

Input impedance: 3 MΩ / less than 100 pF

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Benning IT 101 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info