Bedienungsanleitung Benning MM 1 (Seite 17 von 104) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch, Schwedisch)

577325

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

09/ 2013

BENNING MM 1



height and automatic decimal point placement. The highest display

value is 3200.

5.1.2 The polarity display  is automatic. As positive is implied by the

defined input terminal, only a negative pole will be indicated with "-".

5.1.3 Overranging is indicated by a blinking "1" or "-1" and the buzzer

sounds.

5.1.4 The range selection button "RANGE"  allows the user to change the

range manually and causes the "RANGE" annunciator to appear on

the LCD display. Hold the switch for 2 seconds to return to the auto-

matic ranging function ("RANGE" annunciator disappears from the

display). In the rotary switch position , it is possible to change

between the functions continuity test and diode test by means of the

"RANGE" key .

5.1.5 Measurement values are saved by pressing the "HOLD" button . The

"H" annunciator appears on the display. By pressing the button again

the tester returns into measurement mode.

5.1.6 The nominal measuring rate of the BENNING MM 1 display is approx.

2 measurements per second. The bar graph measuring rate is approx.

12 measurements per second.

5.1.7 The BENNING MM 1 is turned on and off using the rotary switch .

Unit is turned off when switch is in "OFF" position.

5.1.8. The BENNING MM 1 is automatically switched off after 10 min. You

can switch it on again by means of the "RANGE" key .

5.1.9 Temperature coefficient of the measurement reading: 0.15 x (given

accuracy)/ °C , < 18 °C or > 28 °C.

5.1.10 The BENNING MM 1 is powered by two 1.5 V batteries (IEC LR03/

"Micro").

5.1.11 When the battery voltage drops below the operating voltage of the

BENNING MM 1 a low battery symbol appears on the display.

5.1.12 The lifespan of a battery is approx. 1000 hours (Alkaline battery).

5.1.13 Meter dimensions:

(L x W x H) = 155 x 80 x 26 mm without protective rubber holster

(L x W x H) = 165 x 80 x 36 mm with protective rubber holster

Meter weight:

170 g without protective rubber holster

310 g with protective rubber holster

5.1.14 The safety test leads provided with the meter are specifically suited for

the rated voltage and current of the BENNING MM 1. The probe tips

can be covered with protective caps.

5.1.15 The BENNING MM 1 is protected from mechanical damage by a pro-

tective rubber holster . The protective rubber holster  allows the

BENNING MM 1 to be placed upright or hung up during measuring.

6. Ambient conditions

- The BENNING MM 1 is designed for measuring in dry conditions,

- Altitude during measuring: 2000 m maximum

- Overvoltage category/ Location category: IEC 60664-1/ IEC 61010-1 →

600 V category III,

- Pollution degree: 2,

- Protection Class: IP 30 (DIN VDE 0470-1 IEC/ EN 60529)

IP 30 means: Protection against access to dangerous parts and protection

against solid impurities of a diameter > 2.5 mm, (3 - first index). No protec-

tion against water, (0 - second index).

- Working temperature and relative humidity:

for working temperature between 0 °C and 30 °C: relative humidity smaller

than 80 %

for working temperature between 30 °C and 40 °C: relative humidity smaller

than 75 %

for working temperature between 40 °C and 50 °C: relative humidity smaller

than 45 %

- Storage temperature: the BENNING MM 1 can be stored at temperatures

between - 20 °C and + 60 °C. The battery should be removed when tester

is in storage.

7. Electrical specifications

Note: measurement accuracy is given as the sum of

- a relative percentage of the reading and

- the number of least significant digits

This accuracy is valid for temperatures between 18 °C and 28 °C, with a relative

humidity smaller than 75 %.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Benning MM 1 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info