Bedienungsanleitung Benning MM6.2 (Seite 23 von 56) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch)

692253

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

02/ 2016

BENNING MM 6-1/ 6-2



Switch position Function

► Hz

Ω ►

►

Hz ► Hz

►

°C ► °F

5.1.11 The nominal measurement rate of the BENNING MM 6-1/ MM 6-2 is 2

measurements per sec. for the digital display.

5.1.12 The BENNING MM 6-1/ MM 6-2 is switched on and off by the rotating

switch



. Switch-off position “OFF”.

5.1.13 The BENNING MM 6-1/ MM 6-2 switches off automatically after approx.

20 minutes (APO, Auto-Power-Off). It will switch on again as soon

as a key is pressed. Deactivate the automatic switch-off by press-

ing the function key (blue)

and simultaneously switching the

BENNING MM 6-1/ MM 6-2 ON from the switch position “OFF”.

5.1.14 Check the segments of the digital display by pressing the “Smart HOLD”

key

and simultaneously switching the BENNING MM 6-1/ MM 6-2

ON from the switch position “OFF”.

5.1.15 Temperature coefficient of measurement value: 0.1 x (stated measure-

ment accuracy)/ °C < 18 °C or > 28 °C relative to the value at the refer-

ence temperature of 23 °C.

5.1.16 The BENNING MM 6-1/ MM 6-2 is supplied by means of one 9 V block

battery (IEC 6 LR 61).

5.1.17 The battery display

permanently shows the remaining battery capac-

ity over a maximum 3 segments.



As soon as all segments in the battery symbol have gone off

and the battery symbol blinks please exchange the battery for

a new battery immediately in order to avoid a risk through false

measurements for people.

5.1.18 The life span of a battery is approx. 200 hours (alkali battery).

5.1.19 Appliance dimensions:

(L x W x H) = 156 x 74 x 43 mm without protective rubber holster

(L x W x H) = 163 x 82 x 50 mm with protective rubber holster

Weight:

290 g without protective rubber holster

410 g with protective rubber holster

5.1.20 The safety measuring leads are expressly suitable for the rated voltage

and power of the BENNING MM 6-1/ MM 6-2.

5.1.21 The BENNING MM 6-1/ MM 6-2 is protected against mechanical dam-

age by a protective rubber holster

. The protective rubber holster

allows to set up the BENNING MM 6-1/ MM 6-2 when making measure-

ments or to attach it by means of the integrated magnet.

6. Ambient conditions

- The BENNING MM 6-1/ MM 6-2 is designed only for measuring in dry sur-

roundings,

- Maximum barometric height during measurement: 2000 m.

- Overvoltage category / setting category: IEC 60664/ IEC 61010-1 → 1000 V

category III; 600 V category IV.

- Degree of contamination: 2.

- Protection class: IP 30 (DIN VDE 0470-1 IEC/ EN 60529).

IP 30 means: Protection against access to dangerous parts and protection

against solid impurities of a diameter > 2.5 mm, (3 - first index). No protec-

tion against water, (0 - second index).

- Operating temperature and relative humidity:

At operating temperatures of 0 °C to 30 °C: relative humidity under 80 %.

At operating temperatures of 30 °C to 40 °C: relative humidity under 75 %.

- At operating temperatures of 40 °C to 50 °C: relative humidity under 45 %.

- Storage temperature: The BENNING MM 6-1/ MM 6-2 can be stored at

temperatures from - 20 °C to + 60 °C (humidity 0 up to 80 %). The batteries

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Benning MM6.2 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info