Bedienungsanleitung Benno Pedelec - E-bike (Seite 15 von 72) (Englisch)

810831

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Do not use your pedelec if you think

it may not be in perfect condition.

Have a specialist retailer check your

bike.

It is particularly important if you use

your pedelec a lot, either for sports or daily

use, that you regularly have all the important

parts checked by a specialist retailer.

Frame and fork, suspension components

and other parts relevant to your safety such

as brakes and wheels are subject to heavy

wear, which can impact the operating safety

of these parts. A component may unexpect-

edly begin to malfunction if you use it be-

yond its lifespan or recommended period of

use. This may lead to accidents and serious

injury.

Please make these checks before

continuing after an accident or if

your pedelec falls over. Aluminium

parts cannot be safely bent back into shape,

while carbon components can sustain dam-

age which is not recognizable to the eye.

Do not use your pedelec if you think it may

not be in perfect condition. Have it checked

and repaired by a specialist retailer.

If damaged, aluminium parts are non-repair-

able. Carbon components can sustain dam-

age which is not visible to the eye!

Riding a pedelec

Practice operating and riding your

pedelec in a quiet and safe place

before you take to public roads!

Please read all warnings and ad-

vice in this instruction manual care-

fully before using your pedelec.

Always squeeze the brakes of your

pedelec before placing a foot on the

pedal. The electric engine starts

working as soon as you begin to pedal. This

boost is surprising to begin with, and can

lead to falls or cause dangerous trafc acci-

dents and injury to occur.

• Staring at the display screen for too long while

cycling may result in you falling off or causing

an accident.

• When riding a pedelec, make sure that you are

fully familiar with the starting characteristics

of the pedelec before riding it. If the pedelec

starts off suddenly, accidents may occur.

• Neither the bike nor the drive may be tampered

with to increase the speed or performance of the

pedelec. The application of tuning kits or modify-

ing the gear transmission is not permitted.

How your pedelec works

The drive is activated as soon as you begin to

pedal. The amount of assistance depends on the

settings you have chosen. The drive unit turns off

as soon as you stop pedalling or reach maximum

speed (25 km/h). The assistance is automatically

reactivated as soon as the speed is below the

maximum assistance speed and you reapply

pressure to the pedal.

How to most efciently use your pedelec engine:

• Always select the optimal gear and keep your

pedalling rate between 60-100 rpm.

• Start with the low gears.

• As soon as your pedalling rate becomes too

high, shift to the next higher gear.

• As soon as your pedalling rate becomes too

low, shift to the next lower gear.

• If your pedelec uses a hub gear, reduce your

pressure on the pedal before shifting gears.

Your pedelec’s range

It is best to charge your battery at

warm temperatures and set it just

before you start a journey.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Benno Pedelec - E-bike Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Benno Pedelec - E-bike

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info