Bedienungsanleitung Beper BC001 (Seite 14 von 44) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

710519

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Espresso machine Use instructions

Clean and maintenance

1 - Cut off power source and let the coffee maker cool down completely before cleaning.

2 - Clean housing of coffee maker with moisture-proof sponge often and clean water tank, drip tray

and removable shelf regularly then dry them.

Note: Do not clean with alcohol or solvent cleanser. Never immerse the housing in water for clea-

ning.

3 - Detach the metal funnel through turn it clockwise, get rid of coffee residue inside, then you can

clean it with cleanser, but at last you must rinse with clear water.

4 - Clean all the attachments in the water and dry thoroughly.

Claning material deposit

1. To make sure your coffee maker operating efciently, internal piping is cleanly and the peak avor

of coffee, you should clean away the mineral deposits left every 2-3 months.

2. Fill the tank with water and descaler to the MAX level ( the scale of water and descaler is 4:1, the

detail refers to the instruction of descaler. Please use “household descaler”, you can use the citric

acid (obtainable from chemist’s or drug stores) instead of the descaler (the one hundred parts of

water and three parts of citric acid).

3. According to the program of pre-heating, put the metal funnel (no coffee powder in it) and carafe

(jug) in place. Brewing water per “ PRE-HEATING”.

4. Press the ON/OFF switch, the power indicator (red) will be illuminated, you should turn the knob

to the position, make sure the steam button is on the higher position which is the “ ” position,

when there is water owing out and close the pump by turning the knob to the“ ” position, and

waiting for a moment, the coffee maker begins to be heated.

5. When the ready indicator (blue) is illuminated, it shows the heating is nish. Turning the knob to

the“ ” position and make make two cups coffee (about 2Oz). Then close the pump and wait for 5s.

6. Press down the steam button to the lower position which is the “ ” position, waiting for until the

yellow indicator is illuminated. Make steam for 2 minutes, then turn the knob to the“ ”position to

stop making steam. Press the power switch to stop the unit immediately, make the descalers deposit

in the unit at least 15 minutes.

7. Restart the unit and repeat the steps of 4-6 at least 3 times.

8. Then pressing and release the steam button to the higher position which is the “ ”position,

when the blue lamp is illuminated, Turning the knob to the“ ” position to brew until no descaler

is left.

9. Then brewing coffee (no coffee powder) with tap water in the MAX level, repeat the steps of 4-6

for 3 times (it is not necessary to wait for 15 minutes in step of 6), then brewing until no water is left

in the tank.

10. Repeat the step of 9 at least 3 times to make sure the piping is cleanly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Beper BC001 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info