Bedienungsanleitung Berbel BKF 90 iPP (Seite 13 von 36) (Englisch)

784247

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Operation

6006113_a – 01.06.2022

4.2 Cooking with induction

In comparison to other types of hob (e.g. ceramic or gas),

there are a few peculiarities that must be observed when

using an induction hob.

DWARNING!

Risk of burns on hot parts!

The heating time can be very short with induction hobs.

The hob, cookware and the prepared food can become

quickly hot.

☞Avoid contact with hot parts.

☞Monitor the device during the cooking process.

Information for induction hobs:

yDo not use copper, brass, glass, aluminium, porcelain

or stainless steel cookware without magnetic bottoms,

because they are not suitable.

yDo not use magnetic objects (e.g. data carriers, credit

cards) near the device. Because the device works with

a magnetic field, the function of these objects can be

impaired.

Even if the device is working perfectly and the cookware is

suitable for induction hobs, the following noises may arise

during cooking:

yHumming, whistling, buzzing, clicking.

Possible causes:

yWhen set at high power levels.

yWhen using cookware with bottoms made of different

materials.

yIf the hob fan is in operation.

yTriggered by switching processes, e.g. the automatic

detection of cookware. This function can be switched off.

D“4.5.8 Automatic pot recognition function” (page 21).

These noises are normal and do not indicate any limitation of

the device or cookware.

4.3 Control panel

The device is controlled via the control panel, which consists

of six control groups located beneath the four cooking zones.

1 2 3 4

DEFC

A Operation of cooking zone 1

B Operation of cooking zone 2

C Operation of the extractor hood

D Operation of cooking zone 3

E Operation of cooking zone 4

F Operation of the hob in general

The control panel consists of sensor buttons. Each button

must be pressed to execute a specific action. Execution

of the action is confirmed by an acoustic signal and a

corresponding display.

Only the functions that are available in the menu or during

the cooking process are displayed.

Activated functions or cooking zones light up brightly.

A slider control is available for operating each of the cooking

zones. Each marking stands for a power level from 0 to 9.

The slider can be used as follows:

yDirect selection of the desired output by tapping a

specific level.

ySwiping movement to the right in order to increase the

output of the device or the adjusted value.

ySwiping movement to the left in order to decrease the

output of the device or the adjusted value.

The following functions of the cooking zones and extractor

hood are accessible via the menu buttons. The menu level

changes after the menu button is pressed. The symbols of

the functions available for this operating group are displayed.

In order to execute a function, the corresponding position

under the symbol on the slider must be touched.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Berbel BKF 90 iPP Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Berbel BKF 90 iPP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info