680440
42
Zoom out
Zoom in
Vorherige Seite
1/144
Nächste Seite
17 Overview of DIL Switch Functions
DIL 1 Installation direction
ON Gate closes to the right (as viewed from the operator)
OFF Gate closes to the left (as viewed from the operator)
DIL 2 Set-up mode
ON Set-up mode (limit switch and OPEN end-of-travel position) / delete gate data (reset)
OFF Normal mode in press-and-release operation
DIL 3 Type of SE1 safety device (connection at terminal72) when opening
ON Safety device with testing (SKS activating kit or photocell)
OFF 8k2resistance contact strip, photocell from another manufacturer or none (8k2 resistance between terminal72
and 20)
DIL 4 Effect of SE1 safety device (connection at terminal72) when opening
ON SE1 activation triggers brief, immediate reversing (for SKS)
OFF SE1 activation triggers brief, delayed reversing (for photocell)
DIL 5 Type of SE2 safety device (connection at terminal73) when closing
ON Safety device with testing (SKS activating kit or photocell)
OFF 8k2 resistance contact strip, photocell from another manufacturer or none (8k2 resistance between terminal73
and 20)
DIL 6 Effect of SE2 safety device (connection at terminal73) when closing
ON SE2 activation triggers brief, immediate reversing (for SKS)
OFF SE2 activation triggers brief, delayed reversing (for photocell)
DIL 7 Type and effect of SE3 protective device (connection tml. 71) when closing
ON SE3 protective device is a dynamic 2-wire photocell
OFF SE3 protective device is a non-tested, static photocell
DIL 8 DIL 9 Operator function (automatic timed closing) Option relay function
ON ON Automatic timed closing, pre-warning time for
each gate movement
Clocks rapidly during pre-warning phase,
normally during travel phase, is OFF during hold-
open phase
OFF ON Automatic timed closing, pre-warning time only
for automatic timed closing
Clocks rapidly during pre-warning phase,
normally during travel phase, is OFF during hold-
open phase
ON OFF Pre-warning phase for each gate movement
without automatic timed closing
Clocks rapidly during pre-warning phase,
normally during travel phase
OFF OFF No special function Picks up in the CLOSE end-of-travel position
DIL 10 Through-traffic photocell with automatic timed closing
ON SE3 protective device activated as through-traffic photocell
OFF SE3 protective device not activated as through-traffic photocell
DIL 11 Set reversal limit
ON Reversal limit set step-by-step
OFF Normal mode
DIL 12 Setting the slow speed starting point for opening and closing
ON Starting points for slow speed when opening and closing
OFF Normal mode
42
C300 - C800 / Rev. 1.1 RE / 07.2014
ENGLISH
42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Berner C500 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info