Bedienungsanleitung Berner C500 (Seite 40 von 144) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

680440

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

14 Warranty Conditions

Warranty

We shall be exempt from our warranty obligations and

product liability in the event that the customer carries out his

own structural alterations or undertakes improper installation

work or arranges for same to be carried out by others without

our prior approval and contrary to the ﬁtting guidelines we

have provided. Furthermore, the manufacturer assumes no

responsibility for the accidental or careless operation of the

operator and accessories, as well as for improper

maintenance of the gate or for a non-authorised method of

ﬁtting the gate. Batteries are also not covered by the

warranty.

Warranty period

In addition to the statutory warranty provided by the dealer in

the sales contract, we grant the following warranty for parts

from the date of purchase:

• 2 years for the operator mechanics, motor and motor

control

• 2 years on radio equipment, impulse generator,

accessories and special systems

There is no warranty on consumables (e.g. fuses, batteries,

lamps). Claims made under the warranty do not extend the

warranty period. For replacement parts and repairs the

warranty period is six months or at least the remainder of the

warranty period.

Prerequisites

A claim under this warranty is only valid for the country in

which the equipment was bought. The product must have

been purchased through our authorised distribution channels.

A claim under this warranty exists only for damage to the

object of the contract itself. Reimbursement of expenditure

for dismantling and ﬁtting, testing of corresponding parts, as

well as demands for lost proﬁts and compensation for

damages, are excluded from the warranty.

The receipt of purchase substantiates your right to claim

under the warranty.

Performance

For the duration of the warranty we shall eliminate any

product defects that are proven to be attributable to a

material or manufacturing fault. We pledge to replace free of

charge and at our discretion the defective goods with non-

defective goods, to carry out repairs, or to grant a price

reduction.

Damages caused by the following are excluded:

• improper ﬁtting and connection

• improper initial start-up and operation

• external factors such as ﬁre, water, abnormal

environmental conditions

• mechanical damage caused by accidents, falls, impacts

• negligent or intentional destruction

• normal wear or deﬁcient maintenance

• repairs conducted by unqualiﬁed persons

• use of non-original parts

• removal or defacing of the data label

Replaced parts become our property.

15 Excerpt from the Declaration of

Incorporation

(as deﬁned in EC Machinery Directive 2006 / 42 / EC for

incorporation of partly completed machinery according to

annex II, part B)

The product described on the reverse side has been

developed, constructed and produced in accordance with the

following directives:

• EC Machinery Directive 2006 / 42EC

• EC Construction Products Directive 89 / 106 / EEC

• EC Low-Voltage Directive 2006 / 95 / EC

• EC Electromagnetic Compatibility Directive

2004 / 108 / EC

Applied and consulted standards and speciﬁcations:

• ENISO 13849-1, PL "c", Cat.2

Safety of machinery – Safety-related parts of control

systems – Part 1: General principles

• EN60335-1 / 2, when applicable

Safety of electrical appliances / Operators for doors

• EN61000-6-3

Electromagnetic compatibility – Electromagnetic

radiation

• EN61000-6-2

Electromagnetic compatibility – Interference immunity

Partly completed machinery as deﬁned in the ECDirective

2006 / 42 / EC is only intended to be incorporated into or

assembled with other machinery or other partly completed

machinery or equipment, thereby forming machinery to which

this directive applies.

This is why this product must only be put into operation after

it has been determined that the entire machine / system in

which it will be installed corresponds with the guidelines of

the ECDirective mentioned above.

Any modiﬁcation made to this product without our express

permission and approval shall render this declaration null and

void.

C300 - C800 / Rev. 1.1 RE / 07.2014

ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Berner C500 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info