Bedienungsanleitung BeSafe iZi Turn B i-Size (Seite 4 von 112) (Alle Sprachen)

768220

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

12 13

Guarantee

• Should this product prove faulty within 24 months of purchase due to

materials or manufacturing fault, except covers and harness straps,

please return it to the original place of purchase.

• The guarantee is only valid when you use your seat appropriately and

with care. Please contact your retailer, they will decide if the seat will be

returned to the manufacturer for repair. Replacement or return cannot be

claimed. The guarantee is not extended through repair.

• The guarantee expires: when there is no receipt, when defects are caused

by incorrect and improper use, when defects are caused by abuse,

misuse or negligence.

• The child seat MUST NOT be installed in a front passenger

seat WITH AN ACTIVATED AIRBAG.

• The ﬂoor support must always be used. Make sure that

the ﬂoor support is fully pushed down and that the seat is

positioned horizontal with the spirit level in the middle.

• Never drive with a child in the seat if the seat is rotated to the side.

• Make sure the indicators are green before you drive.

! Warning: potential misuse

• Do take care when you remove the cover, as re-ﬁtting the cover is done

in reverse.

• The cover of the headrest can be taken o separately by disconnecting

the beads at the back and pulling o the fabric towards the front.

Removing and reﬁtting the cover

1. Turn the seat towards the door while you pull the rotation release handle

upwards.

2. Check that the shoulder strap slots are level with your child’s shoulders. (7)

3. While pressing the button of the central adjuster, pull the shoulder straps

away from the seat with a ﬂat hand. Make sure to pull the straps evenly so

that they stay at the same length. (8)

4. Open the harness buckle. (9)

5. The height of the shoulder straps and the headrest can be adjusted by

pulling the release handle upwards at the back of the headrest and pulling

the headrest up or down. (10)

6. Position the shoulder straps over the marking at the sides of the seat to

use the magnets to keep the harness open while you position the child. (11)

7. When the child is positioned, place the shoulder straps over the child’s

shoulders and close the buckle: CLICK! (12)

8. Pull the harness strap through the central adjuster in the direction of

the arrow straight up/forwards. Continue pulling until the harness is a

comfortable but a ﬁrm ﬁt. (13)

9. Turn the seat against or with the driving direction before driving and check

if the release handles show green and the seat is locked into the driving

direction. (14)

Positioning of the child

1. To remove the seat from the vehicle, turn the seat rear facing and push the

seat upwards while adjusting the ﬂoor support to its shortest length.

2. Release the ISOﬁx connectors out of the seat by pushing down the switch

for the ISOﬁx connectors on both sides. Pull the ISOﬁx release switch on

both sides to disconnect from the ISOﬁx car anchorage.

18. Tip: For an optimal height of the SIP+, position it between the two raised

dots on the side of the seat shell.

19. Do not use the SIP+ on the seat when the space between seat and door

of the vehicle is too small, which might lead to a situation where the

seat is not positioned correctly on the vehicle seat. (6)

Removal of the seat from the vehicle

Baby insert

1. The baby insert must be used from birth and can be used until a stature

height of 87 cm. Don’t take the baby insert out before the baby can sit

upright by itself.

2. The baby insert can be taken out of the seatshell, by guiding the harness

Baby cushion

1. The baby cushion oers extra comfort for young babies.

2. < 60 cm (16)

3. > 60 cm (17)

through the slots of the baby insert.

3. The baby insert can be positioned back in the seatshell, by guiding the

harness through the slots of the baby insert. Use the baby insert only

in the most reclined position of the seat. Make sure the harness is

positioned correct, so the harness can be pulled tight without twisting.

(15)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BeSafe iZi Turn B i-Size Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info