Bedienungsanleitung Bestron AAC9000 (Seite 45 von 75) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

702402

Zoom out

Zoom in

Vorherige Seite

1/75

Nächste Seite

USAGE - Turning on and off

1. Put the plug in the socket. The devices peeps, which is normal. The display (figure 1, A) indicated the

current room temperature.

2. Push the button “power” (I). The device starts functioning in the last used mode. When you turn the

device on for the first time, it is in the cooling mode. The indication light above the button “mode” lights

up.

3. Set the desired direction of the air stream. Aim the air stream right ahead, or slightly downward by

manually setting the horizontal slats (4) in desired position. You can easily turn of move the device with

the sturdy castor wheels to direct the airstream into the room.

4. Push the button “power” again to turn the device off.

5. After use, pull the plug from the socket.

USAGE - Setting the mode

The device has three operating modes, with which you can ventilate, dehumidify, and cool the room.

Ventilating

1. Press the button “mode” (figure 1, G), until the indication light lights up at “fan”. The device is now

functioning as a ventilator.

2. Press the button “speed” (D) to change between low or high speed exhaust air. The indication light lights

up at “low” (low speed) or “high” (high speed).

3. Press the “swing” button to activate the swing position. This leaves the air flow from the leftmove to the right.

Dehumidifying

1. Press the button “mode” (figure 1, G) once or multiple times, until the indication light lights up at “dehum”.

The device switches to the lowest speed, and will now dehumidify the air.

Cooling

1. Press the button “mode” (figure 1, G) once or multiple times, until the indication light lights up at “cool”.

The device is now functioning as an air cooler, and will cool the air by means of a cooling element.

2. Use the buttons “up” (E) and “down” (F) to set the cooling temperature between 16°C and 31°C.

3. Press the button “speed” (D) to switch between a low or high speed of exhaust air. The indication light

lights up at “low” (low speed) and “high” (high speed).

4. Press the “swing” button to activate the swing position. This leaves the air flow from the left move to the right.

ATTENTION:

• When the internal water collection tray is full, the device stops functioning, and the indication light lights

up on the control panel at “water full”. You have to empty the water collection tray before you can

continue using the device (see ‘CLEANING AND MAINTENANCE – Water drainage’).

• If you often use the device to dehumidify the air, you can also use the continuous drainage (see

‘CLEANING AND MAINTENANCE – Water drainage’).

USAGE - Sleep function

The device has a sleep function. If you turn on this function, the device will operate in its most silent and

energy saving mode.

ATTENTION:

The sleep function only works in the “cool” mode.

1. Press the button “sleep” (figure 1, H) to turn on the sleep function. The device switches to the lowest

and most energy saving mode.

2. Press the button “sleep” again to turn off the sleep function.

ATTENTION:

After turning off the sleep fuction the device remains in the “cool” mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bestron AAC9000 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info