Bedienungsanleitung Beurer BF 105 Body Complete (Seite 28 von 120) (Deutsch, Englisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch)

715716

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

b) Delete individual saved value for a user

–

elect a measured value in the measurements memory “Mem” and briefly press the [SET] button on the con-

trol unit to delete the stored value displayed.

–

ou can also do this immediately after the measurement is taken.

–

se the [ , ] buttons to select “YES” and confirm the prompt using the [SET] button. If you do not want to

delete the value, confirm “NO” using the [SET] button.

c) Delete all stored values for a user

–

pen the measurements memory “Mem” and press the [SET] button on the control unit for around 5 seconds

to delete all values.

–

se the [ , ] buttons to select “YES” and confirm the prompt using the [SET] button. If you do not want to

delete, confirm “NO” using the [SET] button.

Changing the batteries

The control unit has a low battery indicator. The symbol appears in the display when the control unit bat-

teries are flat, and the symbol appears if the scale batteries are flat. In this case, the batteries should be

replaced. Connect the scale to the app again. The system time is updated.

NOTE:

• When changing the batteries, use batteries of the same type, make and capacity.

•

o not use rechargeable batteries.

•

se batteries free from heavy metals.

13. Cleaning and maintaining the device

The device should be cleaned from time to time.

This should be done using a damp cloth and, if necessary, a small amount of detergent.

IMPORTANT

•

ever use abrasive solvents or cleaning products!

•

ever submerge the device in water!

•

o not clean the device in a dishwasher.

14. Disposal

Empty, completely flat batteries must be disposed of through specially designated collection boxes, recycling

points or electronics retailers. You are legally required to dispose of batteries.

The codes below are printed on batteries containing harmful substances:

Pb = Battery contains lead

Cd = Battery contains cadmium

Hg = Battery contains mercury

For environmental reasons, do not dispose of the device in the household waste at the end of its service life.

Dispose of the device at a suitable local collection or recycling point in your country.

Dispose of the device in accordance with EC Directive – WEEE (Waste Electrical and Electronic Equip-

ment). If you have any questions, please contact the local authorities responsible for waste disposal.

ispose of packaging in an environmentally friendly manner.

PAP

15. What if there are problems?

If the scale encounters an error during measurement, the following is displayed:

Display Cause Solution

ERROR:_OVERLOAD

Maximum weight capacity of 180 kg

exceeded.

Loads must be limited to 180 kg.

LOW_BATTERY

Batteries are nearly flat. Replace the batteries (see section 12).

MEMORY_FULL

30 measurements have been stored. Transfer the measured values.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Beurer BF 105 Body Complete Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info