Bedienungsanleitung Beurer BF 105 Body Complete (Seite 29 von 120) (Deutsch, Englisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch)

715716

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

Display Cause Solution

ERROR:_CONTACT

The electrical resistance between the

electrodes and the soles of the feet is too

high (e.g. with very hard skin).

Repeat the measurement barefoot. Dampen

the soles of your feet slightly. If necessary,

remove hard skin on the soles.

ERROR:_DATA

The BIA was successful, but the fat per-

centage is outside the measurable range

(less than 5% or greater than 50%).

Please repeat the measurement barefoot, or

with the soles of the feet lightly dampened

if necessary. If necessary, change your set

activity level.

Empty display The batteries in the control unit are com-

pletely flat.

Replace the batteries (see section 12).

The batteries have not been inserted in

the control unit correctly.

Check the polarity is correct, (see page 20).

Only weight is dis-

played, no diag-

nosis

Unknown measurement as it is outside the

user assignment limit or a unique assign-

ment is not possible.

Select user on the scale using the “ ” button

or repeat user assignment in the app.

See section 9.

No measurement possible

Possible faults Solution

The control unit was not activated before

stepping onto the scale.

Switch the control unit on before taking the measurement. If nec-

essary, wait 30 seconds and then repeat the measurement.

Radio connection between scale and con-

trol unit interrupted.

Re-insert the batteries in the scale and control unit.

Ensure a sufficient distance from strong electromagnetic fields.

The control unit is too far from the scale. Reduce the distance between the scale and the control unit to a

maximum of 2 metres.

The batteries in the scale are flat or have

been inserted incorrectly.

Change the batteries and check the polarity is correct.

Incorrect weight measurement

Possible faults Solution

Incorrect zero point of scale. Just before taking the measurement, activate the scale with the

foot until the operating status appears in the display.

Wait approx. 5 seconds and repeat the measurement. For your

information: because you step on the scale straight away in nor-

mal use, the scale saves the zero point when the scale is switched

off (when the operating status indicator goes out).

Scale is on a carpet. Place the scale on a flat, solid surface.

Stand on the outside of the scale as far as possible without it tip-

ping.

Incorrect weight is displayed. Stand as still as possible.

Incorrect weight is displayed. Wait until the scale switches itself off. Then repeat the measure-

ment.

No Bluetooth

connection ( symbol is missing)

Possible faults Solution

Radio connection

The range in the open is approx. 10 m. Walls and ceilings reduce

the range.

Other radio waves may interfere with the transmission. There-

fore, do not position the scale near devices such as WIFI routers,

microwaves, induction hobs etc.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Beurer BF 105 Body Complete Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info