Bedienungsanleitung Beurer IPL 10000 plus (Seite 35 von 128) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

568802

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

Infection

An infection of the skin is extremely rare, yet still a possible risk after a burn or lesion to the skin caused

by the beurer SalonPro System.

Haematoma

In very rare cases, using the beurer SalonPro System can result in blue/purple haematoma that may last

five to ten days. Once the haematoma fades,

rusty brown discolouration of the skin (hyperpigmentation) can occur, which may be permanent.

STEP 7: What can be expected from treatment using the beurer SalonPro System?

For many users, the beurer SalonPro System may be the first experience they have with a light-based

device developed for use at home. The beurer SalonPro System is simple to use and hair removal ses-

sions do not take long. During a session with the beurer SalonPro System, it is normal to experience

and notice the following:

• Whirring of the fan – The cooling fan in the beurer SalonPro System makes a noise similar to a hair-

dryer. This is normal.

• Cracking noise with every pulse – When a pulse is triggered from the beurer SalonPro System, it is

normal to hear a kind of cracking noise at the same time as the flash of light.

• Slight impression of the applicator – This is necessary and helpful for the placement of adjacent

light pulses and is part of the beurer SalonPro System’s safety function.

• Feeling of warmth and prickling sensation – During each light pulse, it is normal to feel a slight

warmth and prickling sensation from the light energy. Remember that it is important to always use

the lowest energy level for the first hair removal sessions. You may feel a certain warmth up to an

hour after using the beurer SalonPro System.

• Slight reddening of the skin – During or directly after your session with the beurer SalonPro Sys-

tem, it is not unusual to experience a slight reddening of the skin. This is usually most visible around

the hairs themselves. However, if you notice complete reddening of the skin, blistering or burns, stop

using the beurer SalonPro System immediately.

8. Using the beurer SalonPro System

WARNING

If you would like to use the device on your facial area, first read the instructions in Chapter 8.2 to 8.6,

before looking at Chapter 8.1 “Starting treatment”.

8.1 Starting treatment

1. Remove the base unit, applicator and other components of the beurer SalonPro System from the

box.

2. Check that the cartridge is correctly plugged into the applicator.

3. Insert the mains cable into the socket of the beurer SalonPro System BASE UNIT.

4. Insert the other end of the mains cable into a plug socket. Your beurer SalonPro System is now ready

for use.

Note

Before the treatment, ensure that the skin is shaved, clean and dry (free from any residue such as

powder, cream, make-up, antiperspirant or deodorant).

WARNING

Do not clean the skin with flammable liquids such as alcohol or acetone shortly before using the

beurer SalonPro System.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Beurer IPL 10000 plus Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info