Bedienungsanleitung BH Fitness H-491 (Seite 9 von 33) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

542477

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

English

GENERAL INSTRUCTIONS.-

Carefully read through the instructions

in this manual.

Make sure that the machine operates

correctly before attempting to use it.

Do not switch it on if any faults are

detected. Parents and/or those

responsible for children must always

be aware of their curious nature and

how this can often lead to hazardous

situations and behaviour which could

cause accidents For this reason they

must always be supervised by a

responsible person. This appliance

must never be used as a toy.

This appliance can only be used by

one person at a time.

ASSEMBLY INSTRUCTIONS.-

The assistance of a second person

is advisable for the assembly work.

1 Take the unit out of its box and

make sure that all of the pieces are

there, Fig.1:

(A) Main body; (6) handlebar stem;

(16) Saddle post; (11) Stabiliser bar

with wheels; (15) Stabiliser bar with

adjustable blocks; (19) Saddle; (12 R)

and (12 L) Pedals; (1) Monitor; (2)

Handlebar; Bag of screws containing:

(10) Bolts M-8 x 70; (14) Flat washers;

(13) Cap nuts M-8; (a) and (b)

Spanners; (c) Transformer (Mod.H-

493).

2 Take the stabiliser bar (15) with

adjustable blocas (Y) and position it

on the stand at the rear of the

machine, as shown in Fig.2, and insert

bolts (10), fit the flat washers (14) and

the nuts (13), tighten securely.

Take the stabiliser bar with wheels

(11) and position it so that the two red

dots (X) line up, as shown in Fig.2A,

insert bolts (10), fit the flat washers

(14) and the nuts (13), tighten

securely.

3 Mod. H491. Take the screws (8) out

of the main body (A), bring the main

post (6) up to the boss on the main

body, Fig.3, and connect terminals (p)

and (p1). Insert the tip of the cable

sheath into the cable tension control

support (J1), as shown in Fig.4, pull

the sheath (J) up slightly and insert it

into the slot, see Fig.4A, then fit the

main mast onto the boss on the main

body, Fig.5, taking care not to pinch

the cables and make sure that the

tensioning control (W) operates

correctly. Put bolts (8), along with their

washers (7) back in, Fig.6, making

sure that the handlebar is straight and

then tighten securely.

Mod. H-493. Take the screws (8) out

of the main body (A), bring the main

post (6) up to the boss on the main

body, Fig.4B, and connect terminals

(p) and (p1). Put bolts (8), along with

their washers (7) back in, Fig.6,

making sure that the handlebar is

straight and then tighten securely.

4 ATTACHING THE PEDALS.-

The assembly instructions for the

pedals must be followed to the

letter, fitting these incorrectly could

damage the screw thread on the

pedal or the crank.

Right and left refer to the position

that the user adopts when sitting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BH Fitness H-491 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info