Bedienungsanleitung Bianco di puro Gusto Alpha (Seite 8 von 12) (Englisch)

814572

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

14 15

Operating Device – Program Mode

Self -setting program

You can set desired program for each five different program buttons. Press the Setting button for two seconds to turn the

device into Self-setting program saving mode and the LEDs of the five default program buttons flash.

Press and select the program button which you need to write in the alternative program. After that this particular program

and the Setting button LED will be blinking together, and the Time/Speed display will show to indicate it is ready for

receiving the STEP 1 input. Use the Speed control knob and Time setting buttons +/- to set the desired speed and time,

and press the flashing program button to save the first step.

The display will then show to indicate it is ready for receiving the STEP 2 input. Save the following steps in the same

way you entered the first step. Up to 30 steps can be stored and total running time is up to 8 minutes.

After the final step is confirmed, press the Setting button to finished the Self-setting program saving mode of this particular

alternative program. Then all the 5 program LED will be blinking. You can press another program button to start the writing

of that next program, or press the Start/Stop button to exit the Self-setting program saving mode. The buttons saved in the

Self-setting program will have a red LED light .You can use the Self-setting program by pressing this button.

How to replace the default programs and Self-setting programs

In Standby mode, press the default program button or the Self-setting program button for 2 seconds to return default

program or return to the Self-setting program. The LED on the button changes between RED and WHITE. RED indicates it

is ready for the Self-setting program, while WHITE indicates it is ready for the default program.

Operating Device – Program Mode

Default program

There are five default programs indicated by white LED light. Select your desired program by pressing program button. The

chosen program is shown by the flashing white LED light. By pressing the Start/Stop button, the remaining time and the

speed level are shown at the display. Upon completion the program, the device stops automatically.

Symbol Program Program Description Time Display

1Normal Smoothies Speed 20 for 10 seconds,

Speed 30 for 15 seconds,

The speed increases gradually for running program.

00:25 Sec. Remaining time

2 Thick Smoothies

Speed 10 for 25 seconds,

Speed 30 for 10 seconds,

The speed increases gradually for running program.

00:35 Sec. Remaining time

3 Fruit Smoothies Speed 30 for 40 seconds,

The speed increases gradually for running program. 00:40 Sec Remaining time

4 Mixing Speed 9 for 40 seconds,

The speed increases gradually for running program. 00:40 Sec Remaining time

5 Cleaning

Speed 30 for 5 seconds,

Speed P for 2 seconds,

Speed 30 for 5 seconds,

Speed P for 2 seconds,

Speed 30 for 5 seconds,

The speed increases gradually for running program.

00:19 Sec Remaining time

Manual Mode Time and Speed setting Auto-stop after setting time. Running time

Operating Device – Manual Mode

You can set the desired runtime and speed level.

Only for speed setting

Directly turn the Speed control knob and tune the speed from 1 to 30. The device will act in Manual mode correspondingly

at the selected speed.

Turn the Speed control knob to the right, as you gradually increase the speed level. Turning the Speed control knob to the

left to reduce the speed gradually. The display will start counting upwards to show total running time. You can stop the

device by pressing the Start/Stop button. After 8 minutes of total running, the device will stop automatically.

Timer Function

You can preset the total operation time using the Time setting buttons (+ / -) Press the button increases or decreases the

time in one second for short press and ten seconds for long press. After the time is set, turn the Speed control knob to

start operating the device at the selected speed. The display shows the remaining time. When the preset time is over, the

operation stops automatically.

You can freely adjust the speed at any time during the preset operating time, and stop by pressing the Start/Stop button.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bianco di puro Gusto Alpha Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bianco di puro Gusto Alpha

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info