Bedienungsanleitung BionX D-series (Seite 15 von 17) (Englisch)

648008

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

28 29

Cleaning

CAUTION

Never use a high pressure washer or a garden hose to clean the propulsion system. The force

of a water jet could damage the electrical components of the propulsion system.

We recommend a soft sponge or a soft brush to clean the bicycle. Use a moist rag to clean the battery

docking station. Always use very little water, and keep water away from the electrical contacts. Check the

plug-in connections for moisture after cleaning and let these dry, if necessary, before using the bicycle.

Transporting an Electric Bicycle

WARNING

Make absolutely certain that the bike rack on your car is suitable for the increased weight

and the unique frame style of your electric bicycle. A rack that is not suitable can be

damaged or even break during the transport of the electric bicycle. The electric bicycle can

be damaged by an unsuitable bike rack.

When transporting a BionX equipped bicycle on a bike rack, always remove the battery and the console.

In case of inclement weather, your motor and system connections should be protected from the elements.

When travelling by air, it is important to understand that a lithium battery is classiﬁed as dangerous goods

and must be transported by a qualiﬁed handler. Your battery cannot accompany you and your bicycle on

a commercial ﬂight.

Repair and Spare Parts

WARNING

The use of spare parts from unknown sources, for example replacement parts from third

parties, as well as opening the battery or replacing the cellpack is strictly prohibited.

For repair of your electric bicycle, consult a qualiﬁed dealer. The use of spare parts from unknown sources,

for example, replacement parts from third parties, is strictly prohibited. If you

need spare keys for the battery, please contact a BionX dealer. Please retain the

key number for your records. It is located on the battery key, as well as on the

face of the battery lock cylinder. If you are dropping off your bicycle for a

tune up or repair, always bring your battery keys to the dealer.

BionX Key Number

115

FUSE

This notch is very important

Troubleshooting

The system does not turn on

Check the battery and make sure that it is charged. The battery must be correctly inserted onto the

docking station and the lock must be completely closed. Also check that all connectors of the wiring

harness are properly engaged, and the console is inserted properly. If the problem persists, contact

an authorized dealer.

The system can be turned on but there is no assist / POWER PROT appears on console screen /

RC3 Controller LED lights are cascading

Check all connections, in particular that the cables running from the battery to the motor are properly

connected (with the system turned off). Turn the system on. If the problem persists, contact your dealer.

The system is continuously in Generate mode

When the propulsion system is continuously in Generate mode and cannot be switched back to assist mode

by pushing the key, the problem most likely lies with the brake switch that is located under the brake lever.

In this case try to “repair” the system by turning it off and then on again. If that does not solve the problem,

you can temporarily bypass it by removing the plug-in connection from the console to the brake switch.

WARNING

If you bypass the brake switch you also disable regenerative braking, in doing so your

BionX system will not provide any additional braking. We recommend that you contact

a dealer as soon as possible.

The motor is not as powerful after a repair or service

Tighten the nuts of the rear axle to the speciﬁed torque (40Nm/30lb-ft); check that the axle slot is facing

in the direction of 6 o’clock. If the problem persists, contact an authorized dealer.

The battery state-of-charge display on the console does not show “full” after a complete

charging procedure

Make sure that you have followed all of the instructions for the charging procedure. Let the battery cool

off for a few hours and charge it again. If the gauge still does not indicate a full charge, let the battery cool

again, fully deplete the battery and charge it again. If the problem persists, contact an authorized dealer.

The throttle lever offers no response

Check the throttle connections. Next, attempt to calibrate the throttle, hold the and buttons

until a countdown begins at the top of the console screen. Fully depress the throttle lever and release

a few times during the countdown.

The system will not turn on after storage

48V BionX batteries are now equipped with “Deep Sleep” mode, a new function that preserves battery

energy. To activate a battery that has entered Deep Sleep mode, connect it to the 26V BionX power sup-

ply. If the battery is removed from the system when doing so, allow the battery 5 minutes until it turns off

before re-installing. A series of 5 beeps will indicate the battery has shut off and it is safe to install again.

english

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BionX D-series Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BionX D-series

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info