Bedienungsanleitung Bischoff und Bischoff Centuro S7 (Seite 32 von 71) (Deutsch, Englisch, Französisch, Spanisch)

802030

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

Bischoff & Bischoff GmbH |28.07.2020 - revision 3

6362

Centuro S7 | Scooter Scooter | Centuro S7

6. Care instructions for the user

6.1. Cleaning and disinfection

Cleaning

• Make sure that the scooter is switched off before starting to clean

it.

• The frame components and panels of the scooter can be wiped with

a damp cloth. You can use a standard mild cleaning agent if they

are very dirty.

• The wheels can be cleaned with a damp brush with plastic bristles

(do not use a wire brush).

• You can use a damp cloth to remove dust and minor dirt from the

seat, back rest and armrests. Do not use aggressive cleaning agents

because they may attack the surface of the material. The upholstery

can be washed with warm water at 40 °C.

• Make sure that the electrical and electronic components do not

come into contact with water unnecessarily.

Disinfection

• The scooter must be thoroughly cleaned in accordance with the

instructions prior to disinfection.

• Use a standard disinfectant for wipe disinfection.

• Spray the upholstery and handles.

• Allow the disinfectant sufficient time to work before wiping off, as

specified in the manufacturer’s instructions.

• Make sure that the electrical and electronic components do not

come into contact with liquid unnecessarily.

Warning!

Do not use a high-pressure or steam cleaner.

6.2. Check Before Use

6.2.1. Brake Inspection

Make sure your brakes are operating properly before each use.

• Start off carefully and let go of the throttle lever. The scooter must

come to a complete stop as usual.

• When stopped, the mechanical brakes must engage with an audible

click. hould you notice any unusual braking behavior, please notify

your dealer right away and ensure the scooter is not being used.

• The motor brake is functioning correctly if you can’t push the

scooter when it is turned off. Should you nevertheless be able to do

so, then the electro-magnetic brakes are defective. In this case you

may no longer use the scooter. Contact your dealer immediately.

6.2.2. Checking the lights, indicators

and horn

Make sure your lights, indicators and horn are functioning properly

before each use.

• If a unit under inspection does not react when the corresponding

button on the control panel is pushed, please notify your dealer

immediately and ensure the scooter is not being used.

6.2.3. Inspection of Tyres

Before embarking on any journey, check that the tyres are in good

condition.

• Check the tyre pressure. This should be 2.5 bar.

• Carry out a regular check of the tread depth of the tyres once a

month. This should be at least 1 mm.

• Any faulty or worn out tyres must be changed through your

mobility dealer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bischoff und Bischoff Centuro S7 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bischoff und Bischoff Centuro S7

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info